Jump to content
SAU Community

Recommended Posts

Ha, I had a mate at uni who took his set of $800 rims from his corolla to get some SLIGHT rash repaired... the bloke was a panel beater doing some rim repair work on the side...

Dropped them off and was told he'd be called the next day with a quote, gets a call a few days later saying "They're all done, that'll be $650... Come pick them up when you're ready"

And the prick was threatening to not give the rims back until it was paid in full.

Small claims court with evidence of an email from the bloke saying that he'd call with a quote first... = gets the rims back for "cost price" of $200 and the panel beater gets told to stop being a cock :P

Job was crappy anyway... paint was chipping and fading after a few months.

SO GO TO A QUALITY JOINT!!!

Ha, I had a mate at uni who took his set of $800 rims from his corolla to get some SLIGHT rash repaired... the bloke was a panel beater doing some rim repair work on the side...

Dropped them off and was told he'd be called the next day with a quote, gets a call a few days later saying "They're all done, that'll be $650... Come pick them up when you're ready"

And the prick was threatening to not give the rims back until it was paid in full.

Small claims court with evidence of an email from the bloke saying that he'd call with a quote first... = gets the rims back for "cost price" of $200 and the panel beater gets told to stop being a cock :P

Job was crappy anyway... paint was chipping and fading after a few months.

SO GO TO A QUALITY JOINT!!!

lol.

Pretty similar thing happened to a friend of mine.

Repaired 1 rim at a cost of about 900 dollars, but a new rim would have been 1100. He didn't take it to small claims though.

Agree with you re going to a reputable company. I've seen some pretty crappy jobs.

guy we used at honda was http://www.wheelfixit.com.au/ - i got a quote to do a full restoration on wheels i have personally, was 400$ per wheel, would take 2 weeks, or $150 per wheel for gutter rash which i think he could do within the day.

guy we used at honda was http://www.wheelfixit.com.au/ - i got a quote to do a full restoration on wheels i have personally, was 400$ per wheel, would take 2 weeks, or $150 per wheel for gutter rash which i think he could do within the day.

Can these guys un-buckle rims? My SS-V has a slight buckle in one of the rims but it's actually on the outter lip (not the inside of the wheel that most people have).

Took it to the mob at Moorabin but the bloke said it can't be done :unsure:

The freshly painted rotor you dumbass

What's wrong with that? The brake pad will just take it off anyway...

I always do it, leaves a clean line rather than an imperfect masked circle..

I still don't see how that's funny. It's actually smart - unless he is expecting the paint to stay there..

A lot of rotors actually come out completely painted like that.

guy we used at honda was http://www.wheelfixit.com.au/ - i got a quote to do a full restoration on wheels i have personally, was 400$ per wheel, would take 2 weeks, or $150 per wheel for gutter rash which i think he could do within the day.

Not bad at all.

A lot of rotors actually come out completely painted like that.

My DBA4000's came soaked in that rust protection oil from the factory and had black painted centers which extended onto the rotors a bit...

Not once I got a bit of brake cleaner onto them to get rid of the oil :) Goodbye paint.

Yes, the brakes will get rid of the paint themselves, but I still would have covered the majority of it with newspaper and tape to stop the black from getting into the cooling vents, slots and dimples! That wouldn't be cleared by the pads right away...

Can these guys un-buckle rims? My SS-V has a slight buckle in one of the rims but it's actually on the outter lip (not the inside of the wheel that most people have).

Took it to the mob at Moorabin but the bloke said it can't be done :unsure:

I'm not sure if they can do that, email and ask :P

Not sure if prices have changed - been about 10 months since I got that last quote

My DBA4000's came soaked in that rust protection oil from the factory and had black painted centers which extended onto the rotors a bit...

Not once I got a bit of brake cleaner onto them to get rid of the oil :) Goodbye paint.

Yes, the brakes will get rid of the paint themselves, but I still would have covered the majority of it with newspaper and tape to stop the black from getting into the cooling vents, slots and dimples! That wouldn't be cleared by the pads right away...

Ever ran your finger nails through the slots to see how much crap comes out? Don't think a little paint is going to be a worry, and in any case the temperatures that the friction part of your rotors see is MUCH more than enough to take the paint off..

It will come off in the first 5 minutes of driving..

Oil is a different story, but paint? f**k masking it..

Yeah I pretty much covered my rotors, came off after bed in and looks neat vs masked ones that always seem to mask around the line in the center not the actual edge of the pad contact area and still end up with a rusted section :/

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...