Jump to content
SAU Community

Recommended Posts

it's on BAWSAQ:

http://socialclub.rockstargames.com/games/gtav/bawsaq#17

Currently $10.70, I bought when it was $3 or so. Put 400k into it...

Was 10.60 this morning so I put > $1 mil into it. will see how that pans out, but I've got a save so if it f**ks up I'm safe :P

heh, i bought up big in hawk and little, 30% was nice. will keep an eye on that one.

ian, maybe replacement parts? http://www.ozmodchips.com/ps3-parts-c-11_66.html

I took it apart last night but not sure if i want to try and rip open the blue ray. it is one of these ones

http://www.ebay.com/itm/Blu-Ray-Drive-PS3-CECHA-CECHB-CECHE-CECHEC-60GB-20GB-80GB-KEM-400A-KES-400AAA-/151020477925

and it looks like you nead to bend shit to open it

i know a dude that might have a spare one, otherwise ill get a new one off ebay

stock prices are just waves and troughs, but people are testing to see what happens when everyone buys into Hawk&Little. People seem to think it will keep going up, everyone sells, it crashes, rinse repeat.

wish I could stay at home and represent the crew. will be online tonight no doubt (thats if not too laggy)

I took it apart last night but not sure if i want to try and rip open the blue ray. it is one of these ones

http://www.ebay.com/itm/Blu-Ray-Drive-PS3-CECHA-CECHB-CECHE-CECHEC-60GB-20GB-80GB-KEM-400A-KES-400AAA-/151020477925

and it looks like you nead to bend shit to open it

i know a dude that might have a spare one, otherwise ill get a new one off ebay

nuy second hand 360 and game for super cheap, wait until ps4 comes out?

stock prices are just waves and troughs, but people are testing to see what happens when everyone buys into Hawk&Little. People seem to think it will keep going up, everyone sells, it crashes, rinse repeat.

wish I could stay at home and represent the crew. will be online tonight no doubt (thats if not too laggy)

i might give it an hour about 830pm melbs time....

yeah, apparently might not be a bad idea - others are suggesting buy up in it before the japan release (oct 10).

ahhhh, yeah bending stuff might not be good. i could always ask the guys i know at sony, but i doubt they'd have stock lying around :/

also i've got two first-gen xbox 360's downstairs... no case, no hdd no power etc but can probably be fixed, i think they'd rrod' in the past. spose i should do something with them at some stage

its litterally a 5 dollar fix... good little things to have to wire up non smart tv's in the house for media center/ streaming.

true - if anyone wants them they can have them for free - i've got too many devices as it is (ps3 slim, xbox 360 slim, ps4 on the way, gaming pc all on my 27" dell monitor - 40" tv with boxee box and sony internet player). missus would kill me for another thing that makes noise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...