Jump to content
SAU Community

Recommended Posts

My friend purchased his twin turbo 300zx, and his 3L V6 twin turbo engine instantly made me jealous.

I've done a bit of research and it looks like the VG30DETT will stack up to an RB26DETT except the RB will rev higher and the VG will provide more torque. Please correct me if I'm wrong.

So I'm looking at purchasing a GTS4 and doing a sleeper build... The VG recently came back up in my research and it's really got my imagination going...

Before I get too enthusiastic and put heaps of money down on it, can someone tell me if this thing will be able to be road-registered?

I was going to pull a dodgy, get the GTS4 registered in QLD and do the conversion after, that way I don't have to get it checked, but the police will want to check under the bonnet and even the car illiterate guys will be able to tell something is seriously different.

Anyway, vg30dett powered awd r32, thoughts?

Also, do you think an RB26/30TT would be better than a VG30DETT?

Link to comment
https://www.sau.com.au/forums/topic/382709-vg30dett-r32-gts4/
Share on other sites

See I'm not doing it myself, I was going to get Unigroup or something to do it for me... my knowledge isn't that vast :\

I was slightly concerned about the engine bay... bit worried about hte heat in there as well.

Also, you're saying I'll have problems keep AWD? How's that?

I thought the VG30 would bolt onto a 32 GTR gearbox with a bit of fabrication... but like i said, I haven't got heaps of knowledge.

the awd setup runs a diff in the sump

Not wanting to sound totally oblivious, but the way I understand it is a the sump is where all your unwanted oil and shit goes...

What do you mean there's a diff inside the sump? Is it actually swimming in the liquid or is there a diff where the sump goes.

The AWD sump is going to be the real stopper. If you want to keep AWD you are going to have to seriously re-design the sump. I'm pretty sure there are no AWD VG30's and I doubt you will be able to adapt your RB20 AWD sump onto the VG. I think it would be much much less expensive to buy a 300ZX, I doubt anyone will be able to do it for less than $10 000-$15000.

Not wanting to sound totally oblivious, but the way I understand it is a the sump is where all your unwanted oil and shit goes...

What do you mean there's a diff inside the sump? Is it actually swimming in the liquid or is there a diff where the sump goes.

There is a housing on the side of the sump that houses the front differential. Also, the drive shaft to the LH wheel goes through the sump (through a tube through the sump).

A RB20 sump won't even come close, because it is 6 cylinders long, while the VG30 is only 3 cylinders long!

I expect you will need a custom bell housing to allow the RB gearbox to bolt to the VG block.

LOL at engine out for oil change.

Also, don't bother putting a 26 in gts4, easier to buy a GTR.

But buy a gtst and dump VG30 in, less headf**k than trying to make it 4wd if you want to be different.

you realize every time you want to do an oil change on a VG you gotta take the engine out

sounds like an absolute head f**k when you can just put a 26 in with much easier gains

:\ you're joking right?

There is a housing on the side of the sump that houses the front differential. Also, the drive shaft to the LH wheel goes through the sump (through a tube through the sump).

A RB20 sump won't even come close, because it is 6 cylinders long, while the VG30 is only 3 cylinders long!

I expect you will need a custom bell housing to allow the RB gearbox to bolt to the VG block.

Thanks heaps man... Exactly the info I needed to read to get my head around it :)

LOL at engine out for oil change.

Also, don't bother putting a 26 in gts4, easier to buy a GTR.

But buy a gtst and dump VG30 in, less headf**k than trying to make it 4wd if you want to be different.

I don't really want to put the 26 in the GTS4, I was just wondering how the VG stacked against the RB.

I can get the gts4 for around 3k with a f**ked p/s rack and a blown engine, so I thought I might as well buy it (because everything else seemed fine) and engine swap for something different.

VG seems like way too much trouble... might stop the search for now, sell the 33 and use the money to purchase a GTR.

A smarter choice would be the VQ25det or VQ35de. Both came with awd from the factory.

the diff is on the wrong side though

Why VG30 I still dont know...you could build a VERY angry RB34DET for less that it would cost to have a stock VG30 thrown in the car

the diff is on the wrong side though

Why VG30 I still dont know...you could build a VERY angry RB34DET for less that it would cost to have a stock VG30 thrown in the car

The car was going to cost $3k, the engine was around $1500, and I bargained 4k to put the thing in. Wouldn't have been too expensive.

RB34DET would be interesting... never heard of that before though :\

Bored out rb30?

I don't really want to put the 26 in the GTS4, I was just wondering how the VG stacked against the RB.

I can get the gts4 for around 3k with a f**ked p/s rack and a blown engine, so I thought I might as well buy it (because everything else seemed fine) and engine swap for something different.

VG seems like way too much trouble... might stop the search for now, sell the 33 and use the money to purchase a GTR.

In this case, buy it, take the front end out - the whole she-bang. Put GTST K-frame blah blah blah and put in VG30 + box, modifiy the tailshaft to suit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...