Jump to content
SAU Community

Recommended Posts

lol u guys burr up easy. or what about this one, comes with a 16psi actuator so id have to swap it out for a 7psi one.

http://www.ebay.com....#ht_6487wt_1396

And yes i will post pics when its all completed

Are you just blindly searching "skyline turbo" and clicking on the cheapest one you see?

Seriously do some research!

I had one of those turbos on my VL. They're no good. Made some OK power but there were lots of problems.

If you get one, and I strongly reccomend you don't. Make sure you have the right amount of oil going into it, the seals are made of out play dough so they won't handle any excess oil pressure. You need to warm them up and cool them down very carefully or shit gets rough.

They're just totally not worth the hassle.

I also got a cheap stainless manifold too, spend more money modifying the flamin mongrel to fit and I did on the actual manifold then after a few skids it just cracked. Should have just got a 6 boost or something else awesome.

Also had a shitty 55mm monsta gate that'd jam when it got hot; sometimes open, sometimes closed, not really ideal and it cost me my engine from wicked over boost.

I'm sure there are some people out there that'll say they're OK, but I'd rather just a high flow R34 turbo any day. Or my Garrett GT3076R :D

You're better off lurking the forsale threads on here and getting some decent 2nd hand gear than getting some shit ebay crap.

I had one of those turbos on my VL. They're no good. Made some OK power but there were lots of problems.

If you get one, and I strongly reccomend you don't. Make sure you have the right amount of oil going into it, the seals are made of out play dough so they won't handle any excess oil pressure. You need to warm them up and cool them down very carefully or shit gets rough.

They're just totally not worth the hassle.

I also got a cheap stainless manifold too, spend more money modifying the flamin mongrel to fit and I did on the actual manifold then after a few skids it just cracked. Should have just got a 6 boost or something else awesome.

Also had a shitty 55mm monsta gate that'd jam when it got hot; sometimes open, sometimes closed, not really ideal and it cost me my engine from wicked over boost.

I'm sure there are some people out there that'll say they're OK, but I'd rather just a high flow R34 turbo any day. Or my Garrett GT3076R :D

You're better off lurking the forsale threads on here and getting some decent 2nd hand gear than getting some shit ebay crap.

amen - this post should be stickied :)

Didnt know this thread was still going. What about an R32 factory turbo. 10psi actuator ? Can they be clocked ? I have no water lines on my car so do u think they would crap itself being oil fed only ?

I know this is the wrong section. I put some new wheels on my car yesterday. Hiro gold 19x10.5 and 19x9. Whats yous think. Had to roll the rear guards.

Now i have my cooler to install

post-87367-0-64793900-1324012576_thumb.jpg

post-87367-0-86596100-1324012593_thumb.jpg

post-87367-0-27731500-1324012655_thumb.jpg

Didnt know this thread was still going. What about an R32 factory turbo. 10psi actuator ? Can they be clocked ? I have no water lines on my car so do u think they would crap itself being oil fed only ?

I know this is the wrong section. I put some new wheels on my car yesterday. Hiro gold 19x10.5 and 19x9. Whats yous think. Had to roll the rear guards.

Now i have my cooler to install

Wut

Not sure why you would have the water lines blocked off assuming it's still rb25.

Rb20 turbo will fit very easy but will struggle to flow any great power ,still probably make 170rwkw on 14psi. If you are on that tight a budget then rb20 turbo really isn't a bad idea assuming your getting it for $50. For $250 you could get a r33 turbo and make 200rwkw with r32 acuator.

If it's still rb25 then grab some standard water lines and bolt them in with a standard turbo and enjoy good power at a cheap price with some reliability.

Oh no sorry dude this isnt for my 33, It was for a different car im going to build. I wasnt sure which turbo would suit but at this stage im gonna go with a Kando. An R32 turbo would be a good option but soon figured i couldnt get the exhaust dump pipe to work. (curves the wrong way to which i need)

Oh no sorry dude this isnt for my 33, It was for a different car im going to build. I wasnt sure which turbo would suit but at this stage im gonna go with a Kando. An R32 turbo would be a good option but soon figured i couldnt get the exhaust dump pipe to work. (curves the wrong way to which i need)

You do know you deliberately posted photos of a 33 in that post right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...