Jump to content
SAU Community

Recommended Posts

^Re: above comments about 18x11s: I had 18x11 +18 on my 34 GTR and although they looked sweet I couldn't get full lock due to the inside of the wheel rubbing against the suspension upright (Doing 3 point turns around hairpins at Galston Gorge is pretty embarrassing :P). I could have probably spaced them out to avoid this but they were already flush/just outside the guard on the front so it would have made it a fair bit worse.

Back to 10s now and I'm happy that I can turn moderately tight turns :)

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

would look very good. i just recently fitted matt black rims to my mnp r33 gtr n looks alot better than before in my opinion.

do a google search and some images should come up of the sl's on a gtr.

i will be putting some new photos up in the photography section once my abflug rear diffuser arrives from japn

also pretty sure that sunline racing used to use those tcII on their carbon r34 so they must be pretty good if a high class tuner in japan would use them for a time attack car

I am pretty keen to get them, but still not sure about the gun metal on a midnight purple hmmm

^Re: above comments about 18x11s: I had 18x11 +18 on my 34 GTR and although they looked sweet I couldn't get full lock due to the inside of the wheel rubbing against the suspension upright (Doing 3 point turns around hairpins at Galston Gorge is pretty embarrassing :P). I could have probably spaced them out to avoid this but they were already flush/just outside the guard on the front so it would have made it a fair bit worse.

Back to 10s now and I'm happy that I can turn moderately tight turns :)

Oh really, that is a bit of a pain. I really would like a set of 18x11 or 18x11.5 would be even better because you can go to a 315 tyre (I think) comfortably.

I am pretty keen to get them, but still not sure about the gun metal on a midnight purple hmmm

n11smo is selling Gold ADVAN RG I (discontinued) rims with plenty of rubber atm.

Gold on MNP is superb!

Thread title should be:

TE37s the most over used Jap wheel in history?

Ha ha ah.....damn, I think you are right Ash...not come to think of it...damn

As if!

One of the best wheels to come out of Japan!

Totally agree. In my opinion, the LMGT4 and the TE37 are the best rims to grace a R33.

Cheers

I know i'll piss people off but seriously over GTC's,

One of the most over used Jap wheels. TE37's are common but bloody effective. I'd still buy a set for mine eventually as track wheels one day

I know i'll piss people off but seriously over GTC's,

One of the most over used Jap wheels. TE37's are common but bloody effective. I'd still buy a set for mine eventually as track wheels one day

I think the GTC's - regardless of face and lip whatever, is ugly and does not justice to a GTR or any Skyline at all. The spokes looks ugly in my personal opinion. I think the TE37 looks best then followed by the LMGT4 and that's about it. Everything else is a hit and miss thing. Boring I agree, but better be safe than sorry.

What other rims do people rock in their Skylines nowadays? Anything original?

In terms of the looks department, what are the major differences between a standard set of TE37's and the SL version?

Thanks.

Same style / looks but made slightly different.

59652500.jpg

A forged 1 piece wheel.

Success of 400 grams weight loss on the 18x10.5 size was achieved using the latest technology and mold form tooling while maintaining the same original strength and rigidiy as our current TE37 line-up.

By the way, where to buy replacement TE37 stickers? I personally find them ugly (the blue Volk Racing ones) and prefer to have the LMGT4 Nismo ones - anyone put these on as an alternative?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...