Jump to content
SAU Community

Recommended Posts

Hi guys

I bought some Mobil 1 engine oil yesterday for $70 5.5L approx. Mobil 1 EP 5w-30.

His name is nick.

If you live in Sydney you can pick it up otherwise he can ship them out to you.

I was pretty happy with the price do I thought I'd share it.

He has some racing engine oils too, they are more expensive though.

He stocks other brands as well like royal purple.

You can search Mobil 1 on eBay.com.au or call him on

0405 509 621

Mobil 1 0w-40 is $100 here is Sydney for 5L but he sells 6 quarts I think 5.5L?? Approx for $65

Link to comment
https://www.sau.com.au/forums/topic/386912-mobil-1-engine-oil/
Share on other sites

I normally used castrol edge 10w-40 but 5w-30 is the recommended engine oil grade on 350z manual, so I thought I'd give it ago.

Plus on Mobil and castrolegde website the recommended oil for VQ35DE is 5w-30

I'm not an engine oil expert so I just followed the guide lines online as well as the 350z manual.

What are u using At the moment?

I tried a 5w30 and found it very noisy/tappety. Once I changed to a 10w40 it was much better. I also tried a 20w50 and found the engine sluggish. Whatever works for your engine but I would have thought, in summer especially, a thicker oil is in order.

  • Thanks 1

With respect to scott, the weather shouldn't make much of a difference as the thermostat should keep the engine temp near consistent all year round?

All very interesting, but had to jump in here. I agree in general terms, but the thermostat controls the flow of the water in/out of the radiator to keep the *water* at a consistent temp. There would normally be a correlation between water and oil temp, but it will depend on your driving style as to how closely they influence each other and for how long. Anyway, as we all probably know, the first digit is the cold start viscosity and the second is the viscosity at the benchmark temp (100C?). Can't help but think it's critical to match the second to whatever Nissan say for the motor and not play with it. The first just depends on whether you live in Cairns or Hobart and what season it is...

Anyway, I can't help but think a 5W-30 would be a nice 'sweet spot' for all-year round. 10W-40 would be better at the height of Summer I suspect though. Anyone experimented like Scotty?

Edited by Stuart McK

All very interesting, but had to jump in here. I agree in general terms, but the thermostat controls the flow of the water in/out of the radiator to keep the *water* at a consistent temp. There would normally be a correlation between water and oil temp, but it will depend on your driving style as to how closely they influence each other and for how long. Anyway, as we all probably know, the first digit is the cold start viscosity and the second is the viscosity at the benchmark temp (100C?). Can't help but think it's critical to match the second to whatever Nissan say for the motor and not play with it. The first just depends on whether you live in Cairns or Hobart and what season it is...

Anyway, I can't help but think a 5W-30 would be a nice 'sweet spot' for all-year round. 10W-40 would be better at the height of Summer I suspect though. Anyone experimented like Scotty?

Been using nick for oil since i got my car, his details are in my stick "servicing", and i been using Mobil 1 5W-30. No ticking or anything... Just check it regularly every 2k so make sure your not burning it as its quite thin oil.

I am going FI soon so gonna use thicker oil , oh and the Mobil 1 filter is bigger and better than stock too so hit that up.

Anyway, as we all probably know, the first digit is the cold start viscosity and the second is the viscosity at the benchmark temp (100C?).

Not exactly.. the 2nd number does specify the viscosity at 100degC, but the first number specifies the coldest pour point of the oil, basically the temperature the oil becomes so think, it can no longer be pumped. Generally the lower the pour point temperature the thinner the oil will be at 'cold engine startup' temperatures, but this isn't actually what the ?W is specifying.

I don't know about anyone else, but I've never been anywhere where it's -18 C, let alone driven a car there. I think 10W X would be fine for most places in Australia according to the above chart.

I love oil discussions - you guys should read the ones that regularly pop up on the Stagea forum.

^^ Agreed, 10W-X won't be a problem for almost anywhere in Aust. Personally I would still stick with 5W30, just because Nissan recommend this weight of oil for all temperature ranges, and just suggests heavier oil 'may' be used in warmer climates.

Japan can get some quite hot summers, so it is not like they haven't allowed for warm climates with their recommendations.

+1 for Nick... Cant beat his prices. And the Mobile EP models he sells dont even exist here in Aust.

In Australian weather unless you live up in the snowy mountains, the first indicator number 5W or 10W is probably the least of your worries. It wont make much of a difference although I would stick with Nissans reccomendation of 5W-30. You should pay attention to the second number because this will indicate the threshold (or close to) of what temperature the oils viscosity starts to break down.

So if you drive your car hard, then go with the 10W-40 (or higher) as it would be a tougher oil. But this doesnt necessarily mean its better for your engine as thicker oils obviously doesnt flow\move as quick as thinner ones which the VQ35 might need hence Nissans recommendation of 5W-30.

Edited by Bourbon Boy

Yes, your right... And so am I.

Oil Viscosity deteriorates the higher the temperature.

So the higher value of the 2nd number, the better the viscosity is of that oil at 100 degrees.

Sorry, maybe I went into to it too much. lol :P

Maybe we are just confusing terms? In my understanding when oil get so hot it starts to break down (deteriorate), it means the oil is failing, it damages the oil and can cause engine damage. I would expect this would be somewhere beyond 200degC..

I am assuming you just mean the oil thins as he heats up? the oil viscosity will continue to reduce as the oil heats beyond 100degC, but I wouldn't classify that as 'deteriorating'.

A little clarity required here.

The first number is the viscosity when cold i.e at cold start. eg 5 weight or 10 weight. Yes thats what the W is for.

The second number is the viscocity at operating temperature eg 30 weight or 40 weight.

So it depends on how "thick" you want your oil at start up and op temp. depending on environment & driving conditions.

It has absolutely nothing to do with the point where oil breaks down LOL.

I'll also let you guys in on a lil secret which has prob been long forgotten.

GW Sougi 6000 if still available is only $80 for 5 litres of pure synthetic and comparable to Royal Purple / Motul etc etc

http://www.skylinesaustralia.com/forums/topic/22458-the-goods-on-oils/page__pid__6169165__st__2460#entry6169165

Edited by mosoto

A little clarity required here.

The first number is the viscosity when cold i.e at cold start. eg 5 weight or 10 weight. Yes thats what the W is for.

The second number is the viscocity at operating temperature eg 30 weight or 40 weight.

So it depends on how "thick" you want your oil at start up and op temp. depending on environment & driving conditions.

It has absolutely nothing to do with the point where oil breaks down LOL.

yes.gif

Oh, and the Sougi S6000 is long gone, but I hear a replacement (X-6000 or something) is just becoming available?

Whilst I tried them on my VQ25det, I went through just about everything and felt that 10w40 was the best feeling... and I think I'll leave it there (re: Commsman's comment about oil discussion in the Stagea section rolleyes.gif)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Why are people so insistent on making dirty water?!
    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...