Jump to content
SAU Community

Recommended Posts

put my stock cat and factory cat back on and went to campbelltown on tuesday to clear my exhaust, i failed as it registered 96db...with the stock exhaust !!!

dunno how this can be but im about to take the exhaust to a shop to get a big muffler put in

The ADM R32 GT-R's got a different rear muffler for exactly that reason. I thought it was a bit strange and to be honest I can't pick the difference between my ADM or JDM ........ they sound the same to me.

Bob.

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yeh

At the defect area the EPA were there Testing exhausts for noise with mic's

And snooping under the bonnet to make sure all the charcoal canisters are connected, no bovs or atmo catch cans, etc etc

Also checking window tint, thankgod mine is 35% and all the other usual crap

One guy asked if I had my bucket seats engineered, told him to check the other gtr over there cos they are factory !

As for loud exhausts, to flow huge power and be quiet it's going to need to be a custom job. Custom = expensive, which is why hardly anyone goes down that path.

custom isn't necessarily expensive. It depends on if you let someone rip you a new one, or go quality. My system fully fitted cost me less than it should have, but turbo back, custom built mufflers, and a new metal cat should have cost me $1500. I don't think that's overly expensive. Yes more then a "I'll take a noisy ass 3" for $300 thanks!"

Anyone who heard my old 2530 can attest to the fact that it was very quiet for what was in front of it. A verydeep but not loud note at idle and as it came past 3000rpm you could hear the motor louder then the exhaust... Rare in a turbo car.

custom isn't necessarily expensive. It depends on if you let someone rip you a new one, or go quality. My system fully fitted cost me less than it should have, but turbo back, custom built mufflers, and a new metal cat should have cost me $1500. I don't think that's overly expensive. Yes more then a "I'll take a noisy ass 3" for $300 thanks!"

Anyone who heard my old 2530 can attest to the fact that it was very quiet for what was in front of it. A verydeep but not loud note at idle and as it came past 3000rpm you could hear the motor louder then the exhaust... Rare in a turbo car.

were was said muffler aquired

  • 5 months later...

Ill say one thing it's the drivers fault. The car mods have nothing to do with it. It's just plain stupid, this has to stop who ever rights the rules is a complete idiot with no brains. A Speeding driver is a speeding driver. There gonna speed in any car, and they should not be tighting up any engineering rules if a engineer says its safe to be on the road so be it.

upto the cop that decides to pulls you over.......if they want to defect you they will and they will do it however they like....

in my case the cop full lied about what was on my car and i only found that out once i obtained the details from the SDRO (ie the actuall hand written report from himself) and fined me for not meeting as per the engineers report etc etc

the story goes on but gives you an idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...