Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 1 month later...

I now have a time for Wakefield. 1.20.06 using iPhone app. I was getting consistent 20's, very happy considering Duncan's 1.15 is with lot more skill and power. Something to aim for!

Mostly stock rs4s on street tyres. Just hks suspension, r34 front brakes and exhaust.

Good job Ryan!

I hope to get down there sometime and put in a lap time too.

I've added you in my spreadsheet, and once we get a few more updates, I'll get a mod to update thumbsup.gif

RB2.8L engine,

N1 block,

HKS step 3 2.8L kit (HKS pistons, rods and crank),

Garrret Gtx4294r turbo (1.28 rear)

6boost manifold

Custom 4” dump pipe with screamer pipe

Tial 60mm external wastegate

Apexi power fc d-jetro

HKS 1.6mm drag head gasket,

HKS exhaust and intake gaskets,

HKS oil pump,

HKS cam gears,

HKS timing belt,

HKS fuel rail,

HKS 1000cc injectors,

N1 water pump,

Trust sump kit,

Tomei 280 degree 11.5mm lift drag cam shafts,

Tomei drag valve spring kit,

Tomei titanium retainers,

Tomei valve lifter,

Race cut valves,

Race valve guides,

ARP head stud kit,

ARP main stud kit,

Race main bearing kit,

Race crank bearing kit,

ATI/Ross pulley kit,

Race head port intake and exhaust,

Sard fuel pressure regulator

Trust PEII exhaust

Koyorad aluminium radiator

100mm front mount intercooler with custom piping

RB2.8L engine,

N1 block,

HKS step 3 2.8L kit (HKS pistons, rods and crank),

Garrret Gtx4294r turbo (1.28 rear)

6boost manifold

Custom 4” dump pipe with screamer pipe

Tial 60mm external wastegate

Apexi power fc d-jetro

HKS 1.6mm drag head gasket,

HKS exhaust and intake gaskets,

HKS oil pump,

HKS cam gears,

HKS timing belt,

HKS fuel rail,

HKS 1000cc injectors,

N1 water pump,

Trust sump kit,

Tomei 280 degree 11.5mm lift drag cam shafts,

Tomei drag valve spring kit,

Tomei titanium retainers,

Tomei valve lifter,

Race cut valves,

Race valve guides,

ARP head stud kit,

ARP main stud kit,

Race main bearing kit,

Race crank bearing kit,

ATI/Ross pulley kit,

Race head port intake and exhaust,

Sard fuel pressure regulator

Trust PEII exhaust

Koyorad aluminium radiator

100mm front mount intercooler with custom piping

OMG i think i just had an accident thats stagea porn lol

yeah it comes on boost about 5500-6000 and yeah i pretty much end up in the back seat and the missus refuses to get in the car lol due to the noise. and that figure is awhp and no no quarter mile time still running stock box at the moment and dont want to go there run a low time and then require a cage before can go back so want to build an OS GIKEN box for it then take it down for one night of fun and whatever it runs it runs but for a comparison brads 2.7L 600hp stagea ran a 11.3 1/4 so i would expect it to be a 10 second stagea

yeah it comes on boost about 5500-6000 and yeah i pretty much end up in the back seat and the missus refuses to get in the car lol due to the noise. and that figure is awhp and no no quarter mile time still running stock box at the moment and dont want to go there run a low time and then require a cage before can go back so want to build an OS GIKEN box for it then take it down for one night of fun and whatever it runs it runs but for a comparison brads 2.7L 600hp stagea ran a 11.3 1/4 so i would expect it to be a 10 second stagea

Psymin's 550+ awkw Stagea only ever did 12's - it takes the right set up and technique to do 10 or better not just power!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...