Jump to content
SAU Community

Recommended Posts

Hey guys and girls,

Sold my r33 skyline and bought a stagea, wanted one from the first day i ever seen one on the road.

Basically im doing power upgrades to my stag and would like some input and help from those who have allready gone down the same path as what ive done and where im going.

Here are a few pics of the car from when it come over from japan to the current day now........

I have got fitted a front dump pipe where the wastegate feeeds back into the pipe further down a nisstune board from matt at nisstune, a just jap intercooler kit. My mate anthony at adelaide jap fitted this kit, the car then went to jaustech to get the nisstune tuned.

the car was tuned at 169rwks i think that was at 10psi, i was hoping for like 200rwks or close too. I was a little dissapointed, found out the auto trans eats up alot of power, after driving manuals all my life i said my next car after a manual was to be an auto.

That means i can drive lazy and that my other half can drive the car safely, also cut back on my sliding all the time an doing power launches. meaning i have finaly grown up. Least i now can not worry bout cops so much. Im going to stick with the auto trans in the stag....

I have just recently bought a kenobi high flow cat rated at 200 cpsi as well as a standard t3 turbo with high flow internals, gt 30/76 apparently, was running on a skyline. Bill at ATS hooked me up through a boostworx customer, this customer got the turbo high flowed 4 months ago through ats. Now he has sold the turbo to me he is looking to get a GTX 30/76 with external waste gate.

The turbo is getting sent back to ATS as we speak to get a longer snorkel, does this sound right for the stageas to have a longer snorkel? Or is bill trying to rack up some more money?

Once i get the turbo back boostworx will fit the turbo an retune the car and also throw on my high flow cat, and probly get rid of the ressy after the cat an before my muffler. Might even have to get rid of my jap muffler if it stops the flow through my zorst.

Might even get some injectors thrown in and a better fuel pump at the same time, i have got a z32 afm with plug lying around waiting to go on.

So far here is a break down on what i have spent, this is not to show of but to find out if i have payed to much or to little for somethings and to get your input on things i may have bought instead.

$210 Z32 AFM with plug

$370 Dump/front pipe with fitting

$800 Nisstune with a tune

$739 FMIC with fitting

$182 High flow cat

$1100 High flowed turbo 30/76

post-91919-0-66214700-1329820801_thumb.jpg

post-91919-0-55107400-1329820813_thumb.jpg

post-91919-0-11498500-1329823705_thumb.jpg

post-91919-0-81750800-1329823720_thumb.jpg

post-91919-0-47435100-1329823734_thumb.jpg

Edited by 2000 RS
Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Hey ran a similar turbs on old set up with 550cc injectors z32 walbro pump 3"dump de cat pipe 3"zorst rear nismo cannon made 220rwkw on 18 at boostworxs. if you have not got a shift kit in the auto do it so much more driveable mv automatics in blackwood is the place. hmmmm if turbs came off skyline dont see what alteration it should need for stagea

Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/#findComment-6245689
Share on other sites

Nice looking stag. Don't be too dissapointed with that power figure as mainlines tend to read a little lower than a dyno dynamics.

You should fit a shift kit and bigger trans cooler to help cope with the power that new turbo will make.

Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/#findComment-6245690
Share on other sites

Shaun at boostworx said a shift kit installed would only cost $350, so I'm keen to do that after the new turbos been fitted. I will ask about a trams cooler, how much will that set me back? Also can some one put me onto a brand of injectors that will be easily fitted the the stag? I have done a lot of research on the rb25 neo but don't remember much about easy drop in injector upgrades. I should use google to find out lol! But it's always better and price of mind hearing it from someone that is allready running the part in there car.

Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/#findComment-6245706
Share on other sites

Theres plenty of injector info in the forced induction section, spend a few hours searching and learning what works and what doesnt.

Personally I would go with the ID/xspurt 1000's if you can get them in there, or the shorter 750's. Where are you located?

Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/#findComment-6245725
Share on other sites

With the parts you have fitted you should be making 240awkw at least. I made that with my old S1 with a GTST GCG highflowed turbo on 1 bar and still auto trans. You have a Neo - should easily do 240awkw with stock injectors. Since you have top feed injectors you could get ID1000 injectors which have great feedback fom users.

The prices on your list look fine. What I don't see is a full 3in exhaust? Knocking the guts out of your new cat seems a waste and can make the exhaust sound tinny. I bought a 100 cell metal cat from Venom.

The other thing I don't see on your list is a new, grunty intank fuel pump - good insurance against failure and also to provide for your 280awkw! New injectors a GT3076 and a really good tune should see you there !

And look out for a GTR box - its a fairly straightforward swap.

Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/#findComment-6245857
Share on other sites

The other thing I don't see on your list is a new, grunty intank fuel pump - good insurance against failure and also to provide for your 280awkw! New injectors a GT3076 and a really good tune should see you there !

And look out for a GTR box - its a fairly straightforward swap.

X2 decent fuel pump.

It doesn't have a garrett turbine housing to it won't perform like a GT3076. I doubt 280awkw is achievable with a stock nissan housing unless he goes to the happy dyno place over there.

Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/#findComment-6245892
Share on other sites

Shaun at boostworx said the turbo has garret internals and should do 280rwks on a manual, mines an auto so im sure he said id hit around the 240/250rwks.

On another note im thinking 1000cc injectors are overkill? i see other members of this forum using 550cc and hitting over 300rwks.

Too be honest with you i want a safe tune a safe ammount of rwks as i dont want to melt any pistons or kill my engine anytime soon........

Oh also my car isnt the 4wd stagea, its a RS meaning rwd only.

Edited by 2000 RS
Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/#findComment-6245950
Share on other sites

1000cc injectors will give you the headroom you need to go e85 later on, because no doubt in time you will want to do this.

Price difference isn't significant either. Injectors Online do the 725cc Xspurts for the same price as the 1000s.

Might be worth PM'ing a couple of the SAU traders and asking them? I got good pricing from PHR.

Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/#findComment-6245969
Share on other sites

[

66yostagea user_popup.png

Posted Today, 08:22 AM

AFAIK RS = Turbo. RS4 = turbo + 4WD. /quote]

LOL AFAIK what does this mean?

maybe i wasnt paying attention in nissan school for this equation.

Edited by 2000 RS
Link to comment
https://www.sau.com.au/forums/topic/392570-auto-2000-rs/#findComment-6246063
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...