Jump to content
SAU Community

Recommended Posts

Howdy all,

long time no post.

So my plans of motorsport are changing, I'm no longer doing the door to door racing and looking at doing more hill climbs, motorkahanas and the occasional track day

I've been using the V70A for last 4 years on my MX5. Been great for races however given I'm not going to be doing them and doing more shorter runs but grip still needed, are the NT01's from Nitto any good?

from my understanding its similar to R888?

I've not used either but the feedback on 888 was always that they worked well on lighter cars but not heavy ones like skylines.

Despite the posts above about wear, I would be going hankook for short runs, they are clearly the quickest tyres around, there is a reason they were banned from superlap. Plus they are 2/3 or even 1/2 the price of yoko/dunlop/bridgestone options

the Z221's?

yeah look good!

I had R888's years ago and swapped to the V70s and dropped some good lap times at Wakefield.

but given I'd only be at Wakie once this year I don't see the point in spending big!

If you were a bit serious on Hillclimbing, I'd look to a set of Avons in super soft compound. Hoosier probably do something similar spec/capability.

If not, go for the Nittos they will work virtually from cold. Waste of good money on the Hankooks for motorkhana, even softs take a little temp to work.

Hankook weren't "banned" from WTAC, but what regs are going to allow a tyre other than that made by a major event sponsor?

  • Like 1

Gordon Leven sells them, they are the duck's nuts for hillclimbing. http://www.gordonleven.com/brands/avon-tyres/ About $500ea as usual.

Neil got 4 weekends of 4x 1.5 minute runs out of them, or about 30min total life before they were rooted. But they were soft and quick.

The current hotness in hill climb semis slicks is A050 Soft. But they're serious money as well.

Be careful with Nittos - they're not road legal and are not on the CAMS prod car tyre list.

NT01 is the same compound as the R888.

The new R888R is meant to be fully road legal, at least in Europe, but whether the GG compound is the same as the R888 GG I'm not sure.

NT01 is the same compound as the R888.

The new R888R is meant to be fully road legal, at least in Europe, but whether the GG compound is the same as the R888 GG I'm not sure.

Neither of which has anything to do with NT01 being road legal or CAMS approved.

R888 are both road legal and CAMS approved. R888R are not on the list yet, but that's just a formality. NT01 will never be on the list as it does not comply with CAMS void ratio requirements.

  • Like 1

Any CAMS event with classes that have to use semis, are restricted to tyres on the list - even club events. It's just a question of whether the scrutes and competitors know/care, or if anyone else questions it. NT01s are not legal for those classes, but they're not exactly a performance advantage, so chances are nobody would care if they even knew... lol

The cowboys at Morgan Park turn a blind eye to people even using 2 groove cheater slicks in their modified production classes, but that doesn't mean the rules aren't there - it's just that they have mistakenly let it go on for so long that there's now too many people cheating the tyre rules to do anything about it!

Edited by hrd-hr30

No they heat cycle badly. 050s are better long term value as the grip levels are higher and they maintain those levels till they're bald.

048s are old technology - been around forever (at least 15 years that I know of)

+1 we used to have to run them as a control tyre and they were horrible.

Good on the first use, but thy quickly became junk even though they might have plenty of tread left

also, they about the most expensive tyre you can buy.

Well I know not to get them again. Picked up a cheapish second hand set from boz still heaps of tread but since you are saying they dont do well after some use may not matter. At wakey next month if they a rubbish can become a Motorkhana set haha.

I am doing Cams supersprints championship this year. I also dont have $2k for a set of tyres so what is something that will increase grip last a few rounds and not require my first born as a deposit?

Nothing wrong with using the 048s if you already have them. They won't be fast but still better than a set of road tyres. Once you wear them out you can make the decision on what to go for - whether you want to spend big $$ and be competitive or get something cheaper that might be a bit slower.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...