Jump to content
SAU Community

Walbro 400Lph Problem

Hadouken

By Hadouken,
in Engines & Forced Induction

 Share

Recommended Posts

MrStabby Grand Master

MrStabby

Posted
Posted

mine surged on 1/4 tank Lol

so you're pretty lucky to not surge on E

Agreed - mine also starts to surge at around a quarter tank. Sard pump with all the stock mounting stuff. Jez needs to corner faster :devil:

The sudden loss of all power is a give away - no wideband required.

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

XKLABA
XKLABA

Don't flatter your self about the non return valve idea, we have been using them for more then 20years in the race cars My brothers car, I don't have a pic of mine in my phone It runs a VQ35HR wi

scotty nm35
scotty nm35

Because it is perfect, for me and my setup. I guess you just don't appreciate the hard work I put into it, designing a failsafe system on my own, using a single reg and return when everyone on here wa

Ben C34
Ben C34

To seperate the banks and use one reg wouldn't it go Pump > rail> non return > tee piece to common reg on both sides? Pretty easy.

Posted Images

  • 2 weeks later...
Hadouken Grand Master

Hadouken

Posted
  • Author
Posted

So after a long day of testing today, they problem is as follows.

The pump has a main inlet where the hose and sock are connected, then there are 2 little holes where the fuel comes out. A priming/flow method for the pump.

Once the fuel level gets to below the fuel pump (where the 2 holes are exposed to air) the fuel pump needs 5 or 6 seconds of priming from a constant 12 volts before it starts to flow. In a GTR with a 0.7 sec priming cycle added to fuel rail pressure and the time it takes large injectors to fire = a long time of cranking over.

Now this is only a problem in applications where the fuel pump does not sit at the bottom of the tank i.e 33 34 GTR's. 32GTR's have a different fuel pick up set up hence no problem.

So seeing as I was the first 33GTR in unigroup to try the 400lph I was the lucky customer to be the guinea pig :S. boo I say.

Any way the solution Bosch 044 in tank haha.

Maybe nismoid can put this in his "handy threads" sticky to make it known for anyone who wants to run a 400lph Walbro, NOT to do so if the fuel pump is mounted in any other way other than close to the bottom.

Cheers

The dutch

GTScotT Grand Master

GTScotT

Posted
Posted

Surely if the priming time was the issue you could extend the prime time? Why not give it a constant 12v.

Well if youve already put the 044 then thats that I guess.

Wanna sell your 400LPH?

Hadouken Grand Master

Hadouken

Posted
  • Author
Posted

The priming time would have to be changed to 8sec. Now that can be avoided if I just go to a 044.

As I said, I was at Unigroup all of yesterday, and we were testing pumps left right and centre. Tested 3 walbro 400lph outside the tank, and tested a 044.

The 400l was fine when submerged but no good when exposed to air. Did I really want a priming cycle of 8sec or maybe even more every time? No.

So we rigged up a 044 and did a swap, my 400l for the Bosch.

In short, sorry mate don't have the pump.

  • 2 weeks later...
R33huntme Community Regular

R33huntme

Posted
Posted (edited)

So after a long day of testing today, they problem is as follows.

The pump has a main inlet where the hose and sock are connected, then there are 2 little holes where the fuel comes out. A priming/flow method for the pump.

Once the fuel level gets to below the fuel pump (where the 2 holes are exposed to air) the fuel pump needs 5 or 6 seconds of priming from a constant 12 volts before it starts to flow. In a GTR with a 0.7 sec priming cycle added to fuel rail pressure and the time it takes large injectors to fire = a long time of cranking over.

Now this is only a problem in applications where the fuel pump does not sit at the bottom of the tank i.e 33 34 GTR's. 32GTR's have a different fuel pick up set up hence no problem.

So seeing as I was the first 33GTR in unigroup to try the 400lph I was the lucky customer to be the guinea pig :S. boo I say.

Any way the solution Bosch 044 in tank haha.

Maybe nismoid can put this in his "handy threads" sticky to make it known for anyone who wants to run a 400lph Walbro, NOT to do so if the fuel pump is mounted in any other way other than close to the bottom.

Cheers

The dutch

so the whole pump needs to be submerged ie if i was to mount it on the bottom of the tank it should be right? any one know how these go in a stagea 260rs 1999?how do these wire up?

Edited by R33huntme
XKLABA Grand Master

XKLABA

Posted
Posted

Dave posted saying he knows how to "fix it" and he does, last time I was at Enique I was shown why they don't work when not submerged and it is a quick simple thing to fix, shot Dave a pm and I sure he would be willing to explain it, he is a really nice guy if you don't make yourself come across as a f**k stick

Hadouken Grand Master

Hadouken

Posted
  • Author
Posted

Lol, thanks.

He actually took the liberty of pm'ing me. He did inform me to block off 1 of the two holes associated with the priming system. Now thats all good and well, but leave that pump for long enough unsubmerged and the fuel leaks out again.

Either way, we tested them, saw how they worked, blocked off holes, submerged it, left it out of fuel, we did everything bar taking the bloody thing apart.

Its a shame they have to be modified. But I dont mind the 044. Still quiter than my stock pump I had. haha.

T04GTR Grand Master

T04GTR

Posted
Posted

yes, quick and easy fix. and they are on special at vpw for like 120 dollars..

hopfully they realise this fault and re-design the inlet acordingly. you cant just block them up either as it doesnt alow for the pump to self prime. if they are fully submerged the whole time there output goes up heaps with both the bleed holes blocked. :0

  • 3 months later...
DVS JEZ Grand Master

DVS JEZ

Posted
Posted

Just installed 1 into r33 GTR. So far no issue's even on empty but testing to see.

Looking at how hight the pump sits in tank i would think it needs alot more than 1/4 tank to be submerged.

What is the mod that u speak of Dave?

gtraaron Mentor

gtraaron

Posted
Posted

Just installed 1 into r33 GTR. So far no issue's even on empty but testing to see.

Looking at how hight the pump sits in tank i would think it needs alot more than 1/4 tank to be submerged.

What is the mod that u speak of Dave?

My fuel light is on and it is still fine Jez
Hadouken Grand Master

Hadouken

Posted
  • Author
Posted

If they dont have the bleed holes then they will work.

Also remember that the car drove fine all the way to empty. But as soon as you shut it off and leave it for an hour (enough time for the fuel pump to bleed off) then the car would not start with approx 15l in the tank

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...