Jump to content
SAU Community

Recommended Posts

LOL. You're a jerk!

You deserve a chin shot for that!

Got your brakes yet farken?

Haha! Aaaw.. Now don't be like that.

Mmm... Brakes.. Nah they'll be a couple of weeks away yet apparently.

No rush seeing as mine is "Parked" like Yours anyway...!

Haha! Aaaw.. Now don't be like that.

Mmm... Brakes.. Nah they'll be a couple of weeks away yet apparently.

No rush seeing as mine is "Parked" like Yours anyway...!

Still sitting in the corner thinking about what it's done?

Have sticky beak!

Here is an interesting little comparison.

On the left we have a Tomei procam which was in my old head. The profile was 270 @ 10.25mm. On the left we have a JUN 264 @ 10.5mm. The shape is quite a bit different.

2eaf4d6c.jpg

d5e5d7e6.jpg

1e66a89f.jpg

.... I don't know if that coating is going to last Paul. I mean look at it...

But ah... I don't want to burst your bubble or anything...

GOLD !!

Jun looks more rounded and not as peaky, keeps the valve open longer

Tomei is perky and the Jun is nice and full (using the analogy of Edgar Brits)

Marko that last line of yours sound more like spruiking at a Japanese whore house !!

Jun looks more rounded and not as peaky, keeps the valve open longer

Tomei is perky and the Jun is nice and full (using the analogy of Edgar Brits)

Except the tomei is the one on the left and is the one that more rounded due to more duration

Except the tomei is the one on the left and is the one that more rounded due to more duration

You would think that. I had a 260 @ 9.15 poncam there too and it looked the same at the 270 (As in the big fat round nose) . Should have put that in the photo too. I'll do that when i'm out there next. Very interesting.

What I did notice just by running your finger over the lobe, the JUN has a 'bump' where the 'start of duration' starts. ALOT more pronounced than the procam. It obviously ramps open alot faster/harder than the tomei.

Dammit I just re read my post. The JUN is on the right. What a bloody noob!

Well mate I demand a back to back comparison. That's the only way to be sure. Plus you'll be doing the GTR community a great service - which I know will make you warm and fuzzy.

Tomei first? :)

Well mate I demand a back to back comparison. That's the only way to be sure. Plus you'll be doing the GTR community a great service - which I know will make you warm and fuzzy.

Tomei first? :)

haha. There will be a back to back. "that" project is humming along quite nicely ;).

The Tomei's are Ratshit. I spose thats what happens when they weld themselves to the cam caps. They can't be reused and will be cut up at some point for 'the project'.

Haha! Aaaw.. Now don't be like that.

Mmm... Brakes.. Nah they'll be a couple of weeks away yet apparently.

No rush seeing as mine is "Parked" like Yours anyway...!

Got forbid all three of our cars were to be on the road at once lol

No doubt it's something to do with the balance of nature... Law of the jungle.. To prevent the earth spinning backwards if all 3 of us launch in 3rd at the same time...

... Or, I just keep breaking shit.

It's one of those two I reckon... : P

I was out there again today watching a mates SR getting tuned. I pulled out the cams to compare to the "260 @ 9.15's" to the rest from the other night.

Again from the left are the Tomei 270 @ 10.25, middle is JUN 264 @ 10.5 and right is Tomei 260 @ 9.15.

09128a54.jpg

fea07846.jpg

fea07846.jpg

The JUN's are definately more "triangle" than the Tomei's in both "Procam or Poncam". Yavuz is going to map the lift VS duration and lay it out on a piece of paper. I'd like to do a set of standard cams just for shits and giggles. I'm sure I have a set laying around somewhere.

So I would have thought that the Tomei profile would be preferred at first glance.

I know there is a lot more to it, but with the Tomei being more 'square' than than the JUN 'triangle' it's going to have more area under the curve. So the valve must accelerate faster on the opening and be 'more open' for longer, no?

In theory if you could open the valve almost instantly and keep it fully open for its given duration then that would be ideal, the Tomei looks closer to this.

So I would have thought that the Tomei profile would be preferred at first glance.

I know there is a lot more to it, but with the Tomei being more 'square' than than the JUN 'triangle' it's going to have more area under the curve. So the valve must accelerate faster on the opening and be 'more open' for longer, no?

In theory if you could open the valve almost instantly and keep it fully open for its given duration then that would be ideal, the Tomei looks closer to this.

I had the same assumption. I asked Yavuz about this and he waffle quite technical. As I said, he is going to measure the profile and have it on a piece of paper so we can see it on a graph. He was saying the more 'triangular or pointy' it is the better.... But also the harder it is on valve train. Pfft. Harder.

If the 'sponge bob' cams are anything to go by, they will be ALOT more aggressive than this. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...