Jump to content
SAU Community

Recommended Posts

Cheers mate, i was looking into the kits last night coz i think it will be easier to just chuck in a 2.8 crank rods and pistons into my engine already as thats all id need to change instaed of going 3L.

you can re use the existing head studs and all that stuff right? just need new head gasket and bearings?

you won't regret going 2.8, I remember driving Paul's when it had the gt-rs's still on it and the bottom end torque was amazing, I actually made the comment that day "the only thing I'd change is put 2530s on it"

you won't regret going 2.8, I remember driving Paul's when it had the gt-rs's still on it and the bottom end torque was amazing, I actually made the comment that day "the only thing I'd change is put 2530s on it"

yeh in reality i should of done it when i built my motor 3 years ago.

its going to have a t51r strapped on the side of it so it should make it pretty fun ( not that its not fun atm lol)

yeh in reality i should of done it when i built my motor 3 years ago.

its going to have a t51r strapped on the side of it so it should make it pretty fun ( not that its not fun atm lol)

We are still to sing whistling dixie down the freeway Chris! ;)

I know the feeling...done that!!

I always dummy fit first especially with new/modded/rebuilt turbo's.

It's too much of a pain to re-clock once they are in...

Well you would think when you took them down and said "reorientate to fit a GTR" you would expect them to fit!!!!!! :domokun: :domokun: :domokun: :domokun: :domokun: :domokun: :domokun: :domokun: :domokun: .

Bit of an update;

Got the turbos back this arvo, they said they were out by 10 degrees. Don't know if it was that much but they're fixed. The hot side is complete bar the turbo supports and one water line.

Tomorrow I pick up my balance tube and idle garbage from Hypertune. Too hard to explain so I'll take some pics what I've done.

wasnt it just a simple case of clocking the rear or front covers?

Not the point. I wasn't gonna sit there pulling shit on and off trying to get tr correct angle. I know what you're thinking "it ain't that hard". But with two of them that need to be the correct angle its a pain in arse.

Either way, how did it get messed up? Have a look at the 200 gtr turbos out the back and make it the same.

belt the crap outta it! be keen to see what the -5's can produce. Still got my dollars on the 470kw :)

Haha. It would be nice. I'll be stoked with 450 at a reasonable boost level.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...