Jump to content
SAU Community

Recommended Posts

Yeah, Wiggins. 5 in total. Blown cooler pipes are no longer (unless the plenum one pops). No more taking front bars off!

Thinking about painting the airbox black, cutting a hole in the top of it and using the factory airbox snorkel to feed the box too. Can't hurt!?

Silicone is good for 40 psi or so, you will be fine !

Looking GOOD brother!

I like how they ran your piping. Mine is out to the side to make room for the PS reservoir and such, but I like yours a lot. Hypertune is top-notch stuff! I am always leary of 100% solid connections to the coolers because it seems they might induce stress on the piping and turbo manifolds when the engine torques around, but they don't have anything that looks as sexy as that to be honest!

Looking GOOD brother!

I like how they ran your piping. Mine is out to the side to make room for the PS reservoir and such, but I like yours a lot. Hypertune is top-notch stuff! I am always leary of 100% solid connections to the coolers because it seems they might induce stress on the piping and turbo manifolds when the engine torques around, but they don't have anything that looks as sexy as that to be honest!

http://youtu.be/76CEWVXru3M

Have a look. They move around quite a fair bit. More than enough when all combined I'd say. :)

My fabricator is trying to talk me out of going aluminium piping, those pics just about sealed the deal for me :) looks great. I'll need to do some reading on these so called Wiggins clamps

There isn't much you need to know, they are bright purple and very racecar. Just open up your wallet and prepare for butthurt when you hear the price.

On topic, I cannot wait for this to be done. The EFR looks very at home in there that's for sure.

My fabricator is trying to talk me out of going aluminium piping, those pics just about sealed the deal for me :) looks great. I'll need to do some reading on these so called Wiggins clamps

Adel Wiggins clamps. They're actually aviation gear but can be used in automotive applications also. They're a bit of a homo colour but they're that colour so plane guys can see them.

Make sure you're sitting down when you see the price.

What's wrong with alloy piping? Does he want to use stainless?

Yeah we use them at work (I work in an aviation environment) and they are used for everything. If they can handle bleed air straight from a turbine compressor (80+ psi and a couple of hundred degrees Celsius) then they should stop a cooler pipe coming off ;)

You should ask about having them lockwired piggaz. Just for some extra security/piece of mind.

Yeah we use them at work (I work in an aviation environment) and they are used for everything. If they can handle bleed air straight from a turbine compressor (80+ psi and a couple of hundred degrees Celsius) then they should stop a cooler pipe coming off ;)

You should ask about having them lockwired piggaz. Just for some extra security/piece of mind.

Lock wired is a bit too much. I really can't see these blowing off with 30-35 psi considering they're rated to 150-200 psi or something. If they do then there would be another issue like a busted engine mount.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A little more work this week.  Fitted astra power steering pump in the boot with a lowe fabrication bracket. Gave the pump a good clean, fitted Anderson plug and high pressure fitting. With the intercooler being flipped under rad support factory headlights weren't going to work. Ordered a set of origin battle lights, they arrived so got them test fitted. Will require some fiddling to fit nice but was an easy quick option for now. And today we pulled out the manual Rb gearbox and test fitted a ZF 8HP50. It will fit with some casting tabs cut off and small tap of the tunnel with a hammer. Pick up the adapter plate Wednesday so hopefully all bolted in Friday and measure for tailshaft which will be a 2 piece. Been doing a lot of ecu, pdm and tcu loom design so when comes to wiring it in a few weeks will all go smoothly.
    • FYP. Sadly. Even bolt cutters wouldn't take 2 sec. But in the days of 18v angle grinders, nothing is safe.
    • One piece driveshaft I would recommend a dual CV setup otherwise stick to OEM. I have heard most one piece driveshafts cause excess vibration otherwise. The transmission grind I'm quite familiar with. You can try shockproof gear oil, otherwise you need a new transmission. The shifter is extremely simple on these cars. If you want pull apart the assembly and replace the plastic bushing but I doubt that fixes anything. The tail light issue is very common, unfortunately new tail lights are long discontinued. The trunk antenna going up always is because your radio doesn't have a true power antenna control, just remote amp power signal. There is a blank switch plate that you can pop out and install a switch for this or alternatively source a head unit that has proper antenna control. Throttle body sticking you have to disambiguate by disconnecting the cable and seeing if the linkages are the problem or something else. There is a procedure to adjust them, refreshing them is also somewhat involved if that's the issue. I have dealt with many of these issues. Old cars really are fractals of problems. The more you fix the more you discover there is to fix.
    • Welp, you've got a long list of experiences right there. I'd say you're on the right path.
    • That's correct, suits my requirements a bit better. Sure there are also numpties there, however it's generally a different vibe and more my kind of vibe.
×
×
  • Create New...