Jump to content
SAU Community

Recommended Posts

That is true.

Comparing his motor to mine is comparing apples to oranges.

I ran 134mph last time. Might crack 135-137mph on a cool night

Piggaz - is WSID on the cards in the next couple of weeks? Let me know if you go and I'll try to bring mine out on the same night.

 

 

3 minutes ago, usmair said:

That is true.

Comparing his motor to mine is comparing apples to oranges.

I ran 134mph last time. Might crack 135-137mph on a cool night

Piggaz - is WSID on the cards in the next couple of weeks? Let me know if you go and I'll try to bring mine out on the same night.

 

 

Not sure when I'm gonna get down there.

Need to spend a bit of time RE learning how to drive the thing, it's been a long time and a lot has changed.

Wheel alignment first before any dumb shit otherwise I'll end up in a cow paddock.

Sadly not however I have been inspired by this quest for "response bro"

sadly in the opposite way I want a laggy crack whore of a car to take to the track and thrash that's a prick to get a good time out of

 

think I am getting old and grumpy 

 

 

1 hour ago, ActionDan said:

Dump is faggotry. 

Fatz: do you have any fun cars at the moment?

That Corolla though...

 

 

Define fun... lol

i did do this for 24 hours with some mates last weekend in the 31

Have a half share in the charity rally 34 gt 

which does epic skidz now it has 270rwk

and I do have a vq35 6 speed r33 gtst

bit I have a hole that needs filling

and that hole is a  Gtr

 

Ahh that's right, forgot about the 34 rally spec lol

 

I'm getting old, I want something a bit more refined but not something that looks like the 35 or sounds like the M4 [emoji32]

 

My 34 is sexy but may end up in a 35 down the track.

 

So you want T88 on a stock 2.6L with Type B Poncams lol

 

 

 

 

 

28 minutes ago, ActionDan said:

Ahh that's right, forgot about the 34 rally spec lol

 

I'm getting old, I want something a bit more refined but not something that looks like the 35 or sounds like the M4 emoji32.png

 

My 34 is sexy but may end up in a 35 down the track.

 

So you want T88 on a stock 2.6L with Type B Poncams lol

 

 

 

 

 

I was close , 2.6 with the T78, built motor and stock cams, it was sensational as a DD !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...