Jump to content
SAU Community

Recommended Posts

11 minutes ago, Piggaz said:

That’s sick.

Looking forward to whatbyou think about the efr with the “laggy big rear housing”. ?

Sadly won’t be apples with apples however will report back ( mainly with lap times) 

same motor but upgrades include: valve springs, coil packs, crank kit to keep halal tech happy, dry sump and 4:4 diff gears

 

it better feel better

  • 5 months later...

I've seen plenty of videos, results look pretty bloody good to me! 

Maybe he just got sick of some of the carry on that goes on in build threads? 

Given how some people behave around here these days, there's much less of an incentive to share all the ups and downs of a build. 

11 hours ago, Robzilla32 said:

So, what is happening with this build?

In the garage on the trickle charger. ?

Drive it every couple of weeks and just getting used to the box. Low speed, low rpm shifting without the clutch without making it go BANG/CRASH. Getting there ?.

Wont be touching it again for a very long time. The level of “over it” is very high. 

With the 1.45 housing it went 517 AWKW, up from 486. Turbine speed remained the same at 122,000 RPM.

  • Like 1

The box is quite pleasant to drive to be honest, you just can’t drive it like a synchro box.

No need to justify anything lol. Could sit in the garage for all I care. 

  • Thanks 1

Who gives a shit if the box is 5k or 25k and what the intended purpose was.

This is the shit I'm talking about, someone does something, anything, and people almost always go out of their way to tell the owner why it was wrong/wasn't what they said originally/not what their tuner recommended etc and straight away we're into hand bags and anti roll racing shit, again. 
 

Who f**king cares, goals and opinions change, sometimes quite often and very quickly. Deal with it and maybe more people would post more info on their builds. 

 

 

 

  • Like 2
2 minutes ago, ActionDan said:

Who gives a shit if the box is 5k or 25k and what the intended purpose was.

This is the shit I'm talking about, someone does something, anything, and people almost always go out of their way to tell the owner why it was wrong/wasn't what they said originally/not what their tuner recommended etc and straight away we're into hand bags and anti roll racing shit, again. 
 

Who f**king cares, goals and opinions change, sometimes quite often and very quickly. Deal with it and maybe more people would post more info on their builds.

Are you sad because you sold the AU? :(

 

  • Like 1

Hah, nope. Will be glad to not have to move it to the new house.

Am sick of what this place has become in the last few years.

I thought flat cap drifter f**ks had ruined it, but just as many GTR/Big build wankers with too many opinions and egos doing it just as much damage.

Lol I like to stir pigsarse up
 
but he is onto me and doesn’t bite
 
actiondan delivers though
 
yea baby
 
 
Surprised you have the time mate, thought you'd be too busy overcharging people for used GTR junk?


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...