Jump to content
SAU Community

Recommended Posts

Hey guys,

So I just bought a new turbo setup (Hypergear SS3-EG, 6Boost manifold, 50mm Turbosmart gate)

And Im going to bolt it all onto my R33 RB25 with Factory Internals.

Im planing on running dual maps with one for 98 and one for E85

I have heard that E85 allows more boost to be run safely, but have no idea where the limit is.

I was planing on tuning at 17psi for 98, what should I be running on e85?

Also, the closest servo that sells ethanol to me is in fact caltex which is e-flex which I will use most of the time.

When I tune the thing, I was planning on going and getting some proper E85, would it still be alright to run on e-flex after that, or should I do it the other way around?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/400355-how-much-boost-with-e85/
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

I was planing on tuning at 17psi for 98, what should I be running on e85?

I am currently running 20psi for 98

My tuner made it a safe tune to be able to run that.

So really depends on what he feels is good for your car.

I have seen people running 23psi on stock internals on E85

what ecu?

i've never really ran more boost on E85, i know some people do... but Trent has always left the PSI the same.

if you're only running E-flex, don't tune on drum E85 - i've never seen Caltex higher than E70 - on a safe tune, driving on 85% wouldn't make a massive difference, but it's not something you'd want to do all the time.

If you've got a newer ECU which can accept a digital input, thinking about getting a flex-fuel setup.

They're the best! Drive around and give no fark what's in the tank :D

Thats the plan :D

And yeah like SS8_gohan said, flex fuel setup is the safe way to go, but if its just running E85 there are heaps of cars doing it reliabily without it...... Just gotta remember to change the boost level under a certain % of ethanol apparently..

Thats the plan :D

And yeah like SS8_gohan said, flex fuel setup is the safe way to go, but if its just running E85 there are heaps of cars doing it reliabily without it...... Just gotta remember to change the boost level under a certain % of ethanol apparently..

Drove on E85 without the sensor for 12 months. Didn't touch anything. Was a tad richer with the Caltex stuff (going off the wideband) but it never knocked.

Still in two minds about the ECU, tossing up between Nistune and PFC... Its just going to come down to whether or not I can find a PFC for the right price before Im ready to tune.

What ECU's suport the flex fuel sensor?

Still in two minds about the ECU, tossing up between Nistune and PFC... Its just going to come down to whether or not I can find a PFC for the right price before Im ready to tune.

What ECU's suport the flex fuel sensor?

if your considering 'flex fuel' setup the above statement of finding an ECU for the 'right price' wont be an issue, the whole setup is exxy and cant be found at the 'right price'.... there is a whole thread on the flex fuel setup...

Link G4

Haltech

are the ECUs I know can take ethanol feedback for fuel trim... there are more Im sure...

Go the G4, only a couple hundred over a PFC at the end of the day. Chequered Tuning were getting a few in so maybe see if you can jump in on that if you're keen.

Don't have to do flex-fuel straight away but if you have to buy an ECU anyway, you'd be mad not to get a flex capable one now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...