Jump to content
SAU Community

Recommended Posts

hey guys i have a 33gtr and i want to drill some surge holes in my turbo ,,,,,its a t88-34d mostly want it done for the sound it will make can u guys please help

Just get a drill out mate, space them so you can fit around 8 holes in if you want great sound.

That's crap Nismoid....

.......you need at least 10 if you want the sweet sound.

Lol.

Anyway Sam, the holes aren't drilled right through, they go down to a slot which has to be machined in on a lathe, at the height of the lower compressor blades. Perhaps Hypergear could get the slot and holes machined for you? Or can you use a gt35 front and bore it out? I've got a chinese .7 surge ported one here you can buy cheap.

What it will do for performance is anyones guess, do you have surge at the moment you're trying to get rid of or is it purely for the noise? Perhaps a folded gum leaf in front of the compressor would work well? :P

riiiight, so u have tried and proven this then ?

It's a well proven fact that surge slots SLIGHTLY increase lag, they are used on turbos with compressors that flow a lot relative to the turbine side as they are at a higher risk of surge than other turbos. You can't just drill holes in your turbo and expect it to work just like surge slots, it simply won't!

Are you 100% sure you know exactly what surge is and that your turbo is actually surging? If it is the easiest fix (albeit not ideal) is to make it slightly lazier coming onto boost.

I've tested it person that anti surge holes would reduce power to boost ratio and increase lag. I wouldn't run the anti surging setup unless it is surging, and the last thing I had to do to overcome this problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...