Jump to content
SAU Community

Recommended Posts

Lolz....this cracks me up.

Fyi.....the fastest group a r32's in the world use.....wait for it.....a panel filter in an airbox!

Sucking hot air from the engine bay is for noobs!

Yeah, yeah; what would you know about fast R32's anyway... :whistling:

Never got the whole pod filter thing...

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Lolz....this cracks me up.

Fyi.....the fastest group a r32's in the world use.....wait for it.....a panel filter in an airbox!

Sucking hot air from the engine bay is for noobs!

Remind me, is that beautiful shiny airbox you refer to a stock R32 item?

lol, my point is that they don't use the standard "retail/consumer" R32 airbox because it would be too restrictive and instead designed that lovely air box which uses two panel filters if my very hazy memory serves me correctly.

In the end, more air + more fuel = more powah, so why the hate on a proper pod set up?

lol, my point is that they don't use the standard "retail/consumer" R32 airbox because it would be too restrictive and instead designed that lovely air box which uses two panel filters if my very hazy memory serves me correctly.

In the end, more air + more fuel = more powah, so why the hate on a proper pod set up?

if it sucks from the engine bay it's shit!!!!! end of story....no contest..........sounds good and goes shit!

Not saying that all setups are bad......of cause a well set up CAI will work but if you go to all that hassle why not do it properly? Surface area will always win so why go with a POD???? You don't see POD's on GT500, GT1, GT3, V8SC........I wonder why that is?

BTW.....Dad's old road/race going R32GTR was a little of 600hp at the wheels.....standard airbox!....ran 11.1's all day hot or cold! The guy's with POD's were all inconsistent!

if it sucks from the engine bay it's shit!!!!! end of story....no contest..........sounds good and goes shit!

Agree 100%

Not saying that all setups are bad......of cause a well set up CAI will work but if you go to all that hassle why not do it properly? Surface area will always win so why go with a POD???? You don't see POD's on GT500, GT1, GT3, V8SC........I wonder why that is?

BTW.....Dad's old road/race going R32GTR was a little of 600hp at the wheels.....standard airbox!....ran 11.1's all day hot or cold! The guy's with POD's were all inconsistent!

POD designs generally have a larger surface area than a panel filter, that said it also comes down to the efficiency of the filter medium.

Definitely nothing against an airbox, nor a properly set up pod.

I don't know where you got that info Cam, which pods do you think magically have a larger surface area? I'm happy to prove you wrong, just bring a pod to me before tomorrow night and we can test it on the dyno while its being tuned.

I don't know where you got that info Cam, which pods do you think magically have a larger surface area? I'm happy to prove you wrong, just bring a pod to me before tomorrow night and we can test it on the dyno while its being tuned.

His talking about the circumference of it vs the flat dimensions.

With your bonnet open and the fan on you "might" make more HP..."might"! Bonnet closed and no fan :no:

I don't know where you got that info Cam, which pods do you think magically have a larger surface area? I'm happy to prove you wrong, just bring a pod to me before tomorrow night and we can test it on the dyno while its being tuned.

If you take the filter apart and straighten out the filter medium in both the pod design and the panel design, you'll find that generally the pod will have a larger amount of filter medium, thus larger surface area.

I'd be interested to test out a decent pod on your car actually, but you'd have to extend the intake piping to either in front of the radiator or down to the area in front of the passenger front wheel. As it is, I do actually have such a pod sitting in my garage....

there is a pretty easy solution to this. Why don't we hook up my laptop, and just read the intake temps on two different cars- one with Pod, one with Airbox.

Just need some test subjects in sydney!

I'm sure Craig won't mind being the stock airbox car.

Who got a pod?

(would use my car, by the AFM isn't in the stock position, so it won't be an accurate reflection really)

Lol. Back in your box. :)

I compared a stock paper panel and a pod just before, the paper one looks like it would have twice the surface area. Does anyone have an old pod they can cut up in the name of science? I will measure the panel filter.

Does anyone have an old pod they can cut up in the name of science? I will measure the panel filter.

How about they just measure a couple of diameters or circumferences, Im sure we can just do some maths :P

Look what you've started now cam!!!!

Anyone ever seen a pod shaped vacuum cleaner that's any good? Or are we all using the flat type.....might go and check with the wife to see what we have!

Pretty sure they all feed the same sized pipe (unless it has been changed) so we could dick schwing for ever and a day I reckon two parts of bugger all difference if there is a reasonable cold air feed to a pod or a panel filter.

Do it or don't do it. It doesn't matter much either way. Sure the quality of the pod/panel comes into it but I am assuming a reasonable quality pod/panel is used.

I changed mine for ease of packaging reasons with aftermarket turbos and so I could exercise my dodgy cold air box fabrication skills. I am under no illusions about whether there is power to be gained or lost at the power levels my cars are reaching.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...