Jump to content
SAU Community

300Hp Out Of A Rb20Det.

Maximum09
 Share

Recommended Posts

Maximum09 Apprentice

Maximum09

Posted
Posted

Hi all,

I've got an 1992 R32 GTS-T. I'm using it as a daily but I also drift in it. I've done all the relevant suspension mods

but i'm now gonna start playing around with the engine. I dont want to do too much to it, my goal is about 300RWHP.

But I want quick spool and high torque. All I have mod wise at the moment is a return flow FMIC and a catback exhaust (how I got the car, I haven't touched the engine at all.)

I've lots of people tell me different things but I want to get some more opinions on what to do from people that know a little bit more.

Goal; 300RWHP out of a RB20DET with quick spool and high torque. Suggestions?

K GO!!

Link to comment
https://www.sau.com.au/forums/topic/400873-300hp-out-of-a-rb20det/
Share on other sites
AngryRB Grand Master

AngryRB

Posted
Posted (edited)

drop rb25 into it with basic mods or increase compression ratio, or highflow turbo or run E85 with alot of boost, or run methonal injection with alot of boost, a really good tune, find an rb30et and drop it in with the intercooler and a bar of boost now that will be one torquey thing in an r32. even standard they haul ass on a r32

Edited by SliverS2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Engine Issue

      By GTSBoy · Posted

      Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Murray_Calavera
      Engine Issue

      By Murray_Calavera · Posted

      Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Harinder singh
      Engine Issue

      By Harinder singh · Posted

      Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Duncan
      Engine Issue

      By Duncan · Posted

      Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Harinder singh
      Engine Issue

      By Harinder singh · Posted

      Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...