Jump to content
SAU Community

Recommended Posts

Fuel doesn't have any idea how many cylinders the combustion chamber its being squirted into is joined up to ;)

Ultimately the harder the work the fuel has to do, the more E85 comes into its own... but you can still definitely get gains. I've seen from 3-7% from E85 on a naturally aspirated engine, depending on a variety of things. The most magical results I've seen are on highish compression turbo setups running a bunch of boost though.

With a relatively stock V8 I'd say the extra fuel usage would outweigh the gains, unless you have exhausted all alternatives and not worried about the ~35% extra fuel usage - and the fuel system upgrade you are likely to need to do to support that fuel usage.

If you were going to drop a decent turbo or two into the mix then E85 very quickly starts coming into its own.

Link to comment
https://www.sau.com.au/forums/topic/400917-e85-fuel-on-v8/#findComment-6368986
Share on other sites

Any engine tuned to run on E85 will see some power benefits, but these benefits are much more obvious with engines that are prone to detonation or high heat, as high octane and reduced temperatures are the mainstay advantages of E85 over unleaded. Thus forced induction engines benefit greatest from it, but there's no reason you can't advance the hell out of the timing on an N/A V8 and see some good gains there.

Link to comment
https://www.sau.com.au/forums/topic/400917-e85-fuel-on-v8/#findComment-6368996
Share on other sites

6% is still 6% , is that throughout the revrange or just a top end figure..I was thinking e85 could help gain some midrange..

My missus has a 3L Accord. its a zippy tank. but unfortunatly there isnt alot that can be done with it as the auto box is subject to failure even in stock form.

I think the comp ratio is 10.1, Now I read a thread where a guy just filled his up with E85 ,with stock everything and no additional tuning he was pulling at least a car length on a similar car on pulp..he ran it for a while with no issues but finally saw reason that it might not be the greatest idea without a proper tune

I have been very tempted to get an emanage or something, open up the exhaust a little and just tune for e85 to see what gain could be had..A 10% top end at absolute best, would be all I would expect, but more importantly I am interested in the low to midrange gain it could have as that is where it gets driven most..

i have been running it on e10 for ages without issue and getting great fuel economy as well, almost equal to BP98.

There will be little gain with stock compression. Chuck some 13:1 comp pistons in and it'll be a whole different story!

And biannual headgasket replacements...lol ..this was always the best way to make a V8 (or any NA for that matter) move anyway

Link to comment
https://www.sau.com.au/forums/topic/400917-e85-fuel-on-v8/#findComment-6371367
Share on other sites

Well all you really need is a bigger pump and maybe a bit of extra pressure should work to some extent..At worst you get bigger injectors...

But i see where your going, Injectors,pump,piggyback,your looking at least 2000$ for for only a 5-10% increase...

Though if you already have these mods in place you have nothing to lose..and plenty of people have spent more for less

Link to comment
https://www.sau.com.au/forums/topic/400917-e85-fuel-on-v8/#findComment-6371658
Share on other sites

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...