Jump to content
SAU Community

Recommended Posts

On 8/2/2016 at 2:18 AM, Terry_GT-R34 said:

Has anyone been caught up in substantial price rises of late?

On what specifically? I know Nismo was supposed to raise prices across the board, at least so I heard. Not sure if its because of us Americans buying up a lot of 32's and wanting parts or what lol. But that is why I splurged a few months back to get parts at those prices before they raised them up a bit.

 

Anyways, found a cool shot of my car from a Street Driven St.louis drift meet. Wish I had time to give the car a deep clean! Got to love Nismo 10th anniversary recaro seats!!

rdv9SzJ.jpg

Edited by JTCC
  • Like 1

Prices only went up on a handful of nismo parts, mostly the carbon parts. I have compared nearly everything in the 2015 vs 2016 catalogue.

Nismo is offering less discount to suppliers in japan so even though the retail price hasn't increased you might find the parts costing you more than they did before April 1 2016 depending on who you use to import your parts

  • Like 1
  • 2 weeks later...

My set of the Nismo LM-GT4 Omori Factory 2016 Version 18x10.5 +15 wheels arrived yesterday too. Great minds think alike hey Raj!  

Nice to have 4 sets of LM-GT4's again, i was feeling a little short dipping back down to only 3 sets there for a minute  ;) 

 

image.jpeg

image.jpeg

Edited by Gts30t
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...