Jump to content
SAU Community

How Nosiy Is A Hks Super Dragger?

Torques

By Torques,
in Engines & Forced Induction

 Share

Recommended Posts

GotsWapan Community Regular

GotsWapan

Posted
Posted (edited)

My super drager was buggered in the cannon, all rusted and crumpled some how.. Causing a restriction enough to hold back a 12psi actuator to 8.5psi. Cut it open cleaned it out so its hollow but its very droney now lol :down:

Edited by GotsWapan
heller44 Mentor

heller44

Posted
Posted

I've got a hks super drager on my 32 and it isn't loud at all. I may go down the path of removing the mid muffler to a resonator to get Abit more sound out of it.

Thought long and hard about doing this to mine as well.. but it is nice not being stung every time I get to take it for a drive.

Torques Mentor

Torques

Posted
  • Author
Posted (edited)

LOL

Not only chicks,

I like to hear my turbo and whether the engine is pinging.

Also it is nice to listen to the radio.

A noisy exhaust doesn't cut it .. nor does a dump-valve ;)

The chicks love the quiet exhausts. Then they think they can talk the whole time ur driving

Edited by Torques
  • 3 weeks later...
Torques Mentor

Torques

Posted
  • Author
Posted

Just to recap on the topic

I installed the exhaust and it is quite loud :(

There's a heavy low rpm drone which is more behind the car than in the car.

I got a lot of angry looks from people at bus-stations (if you know what I mean)

It's a bit much for city driving, and I will try to get the drone down with one of these mini silencers.

I suspect the exhaust is so noisy since I have no CAT installed ...

post-33912-0-57509100-1345481256_thumb.jpg

post-33912-0-54265100-1345481261_thumb.jpg

AngryRB Grand Master

AngryRB

Posted
Posted

Just to recap on the topic

I installed the exhaust and it is quite loud :(

There's a heavy low rpm drone which is more behind the car than in the car.

I got a lot of angry looks from people at bus-stations (if you know what I mean)

It's a bit much for city driving, and I will try to get the drone down with one of these mini silencers.

I suspect the exhaust is so noisy since I have no CAT installed ...

Its noisy cause there practically no muffler, a rear cannon like that will do nothing if its straight thru.. its not much different to having just a straight thru pipe on the end...

I used to have the exact same on the back, now i got a proper muffler and still make the power and it actually sounds alot nicer..

Torques Mentor

Torques

Posted
  • Author
Posted

Which muffler did you get?

Its noisy cause there practically no muffler, a rear cannon like that will do nothing if its straight thru.. its not much different to having just a straight thru pipe on the end...

I used to have the exact same on the back, now i got a proper muffler and still make the power and it actually sounds alot nicer..

Torques Mentor

Torques

Posted
  • Author
Posted

I found this one ...

http://www.japspeed.co.uk/Nissan-Skyline-R32-R33-Silenced-Decat/p-0-275/

Maybe worth a try (I'd get it cheaper)

a cat and a middle resonator/small sized muffler will help out a lot.

AngryRB Grand Master

AngryRB

Posted
Posted

i cant say if that one will help much, i would guess it wouldnt cause it looks smallish...

I have a 3 1/2inch system with hotdog resonator and a 3inch X force muffler ( large oval) , the muffler is semi straight thru and forces the exhaust into it to muffle the noise , but obviously its flowing great cause it made well over 300kw..

I think you would be happy with a similar setup, it has a nice muffled , tough note thats quiet enough to hear your radio without dronning. can hear it in my thread on the dyno...

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

on my GTT i had a Hypergear OP6 Highflow and a R33 Super Dragger :), R34 is slightly shorter, so it only needed a little modifications. Mine was very quiet, running a CAT obviously (you're stupid not to) and i THINK there was maybe another section in there that's different to yours.

when idling i'd get people asking me if my car was on :D - but had a nice note, didn't drone and flowed well enough for the situation.

Torques Mentor

Torques

Posted
  • Author
Posted (edited)

Thanks,

I removed the CAT 3 years ago, it's common practice here since (older) JDMs can get away with it.

(Removing that CAT actually made a big difference, so why is that stupid?)

Also my car was tested for emissions recently and it was all to plan, no complaints.

However I am considering getting a high cell count CAT.

I am certain that would also solve the noise issue ..

on my GTT i had a Hypergear OP6 Highflow and a R33 Super Dragger :), R34 is slightly shorter, so it only needed a little modifications. Mine was very quiet, running a CAT obviously (you're stupid not to) and i THINK there was maybe another section in there that's different to yours.

when idling i'd get people asking me if my car was on :D - but had a nice note, didn't drone and flowed well enough for the situation.

Edited by Torques
AngryRB Grand Master

AngryRB

Posted
Posted

on my GTT i had a Hypergear OP6 Highflow and a R33 Super Dragger :), R34 is slightly shorter, so it only needed a little modifications. Mine was very quiet, running a CAT obviously (you're stupid not to) and i THINK there was maybe another section in there that's different to yours.

when idling i'd get people asking me if my car was on :D - but had a nice note, didn't drone and flowed well enough for the situation.

must of had a silencer somwhere.. cannons will never be quiet.. not like that..

put a high cell cat and you'll take some edge of it, better off with a 100cell cat or no cat, and a good sized oval proper muffler, semi straight thru

Torques Mentor

Torques

Posted
  • Author
Posted

Hi,

What small box do you mean?

Do you have any pictures?

Suprised, seeing the pic.. as the one im about to put up for sale has a small box.....

And it wasnt to loud or drowny at all.

actually sounded good!!

Torques Mentor

Torques

Posted
  • Author
Posted (edited)

Yep, I agree a 100%, cannons will always be on the louder side.

(especially when they are 3.5'' in diameter)

As for the CAT if I could find one with a 3'' flange that would be great.

The standard CAT is just 60mm (3''=76.2mm)

must of had a silencer somwhere.. cannons will never be quiet.. not like that..

put a high cell cat and you'll take some edge of it, better off with a 100cell cat or no cat, and a good sized oval proper muffler, semi straight thru

Edited by Torques

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...