Jump to content
SAU Community

Disposing Used Coolant

xntrq

By xntrq,
in General Automotive Discussion

 Share

Recommended Posts

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Damn, i thought the newer generation of coolants were environmentally friendly(er) n putting them down the drain wasnt a problem.

Not so the case?

I asked the local Natrad bloke what he does with his waste, he said he treats it (to even out the PH I think) and then dumps it down the drain.

GTR-N1 Grand Master

GTR-N1

Posted
Posted

I asked the local Natrad bloke what he does with his waste, he said he treats it (to even out the PH I think) and then dumps it down the drain.

There are many neutral pH substances that should never be dumped in a drain.

The treatments he uses might include (amongst other things) surfactants as well as acid/alkali chemicals I think

*LOACH* Veteran

*LOACH*

Posted
Posted

just tip it on your weeds....

don't pour it down the drain and do not tip it on your weed...

I just chuck it on the plants...doesn't seem to do them any harm, in fact I noticed that at my parents house the weeds that my father emptied coolant on did better than the neglected adjacent weeds which didn't get a watering.

gotRICE? Veteran

gotRICE?

Posted
Posted (edited)

Lol seems like my "pouring down the toilet" post got deleted.

The only reason i said that is because all sewerage in the City i lived in is processed in a treatment plant before going anywhere near the ocean. The water outlet from it is cleaner than the water its being dumped into. So really its not a bad option. :)

And im pretty sure a treatment plant is well equipped to handle anything that could possibly be flushed down a toilet. They would have had it all and some.

Edited by gotRICE?
sydking Veteran

sydking

Posted
Posted (edited)

If some of you have seen what ends up in the tips, and leaches into the ground, Coolent it the least of your worries - Though im not one to add to the crap land fill.

Check with local council - i know mine has cirtain days per year were they set up a big chemical/paint/oil waste disposal at a local carpark,

They let you bring it all and dispose of it, Best thing it, due to saftey they wont let you out of the car, So pop your boot and they will grab it all out for you :)

Actaully my local council has some good services- Free woodchipping/mulching 5 times per year its great. Free mulch and dont have to take anything to the tip, Just go nuts with the chainsaw and leave it all out the front drive way- Come home to 6-7 bags full of fresh mulch.

Edited by sydking
sydking Veteran

sydking

Posted
Posted

Lol seems like my "pouring down the toilet" post got deleted.

The only reason i said that is because all sewerage in the City i lived in is processed in a treatment plant before going anywhere near the ocean. The water outlet from it is cleaner than the water its being dumped into. So really its not a bad option. :)

And im pretty sure a treatment plant is well equipped to handle anything that could possibly be flushed down a toilet. They would have had it all and some.

Thats cool!, Our here in sydney goes straight out intot he ocean, Feild of mars even has the old above ground sewage tunnles from many years ago.

And wasent it maroobra beach back in the day that had the sewage pipes leading straight into the beach haha

jjman Mentor

jjman

Posted
Posted

Lol seems like my "pouring down the toilet" post got deleted.

The only reason i said that is because all sewerage in the City i lived in is processed in a treatment plant before going anywhere near the ocean. The water outlet from it is cleaner than the water its being dumped into. So really its not a bad option. :)

And im pretty sure a treatment plant is well equipped to handle anything that could possibly be flushed down a toilet. They would have had it all and some.

whilte the sewerage processing systems can deal with it, doesnt mean that it easily or prefereably can. For example, the amount of processing that it takes to sort bleach via the sewerage system is huge. But of course most people do use bleach in their toilets n sinks. But, essentially, its bad for the sewerage processing system.

Im sure coolant would also fall into this category.

xntrq Veteran

xntrq

Posted
  • Author
Posted

OK, I've just asked my neighbour Ricky, who has a 80 year old Antique car.

He (Alan) will gladly take that pre-1985 coolant off your hands :)

I can pick it up for him.

Sure man, but its a little bit of a drive to pick up for a bottle of coolant!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      You Gregged a whole racetrack!?
    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...