Jump to content
SAU Community

Recommended Posts

Hey Guys

Car: 1997 R33 S2 GTST

Tyres : 265's x9 rear and 235 x 8.5 front and decent tyres as well

Suspension : Pedders Coilovers

Ok so im under no impression that im a great driver by any means but now I spin out ALOT.

I span two weeks ago ( a full 180degree spin) when going around the roundabout in the wet. I went around it quite slowly(factoring in that it was wet and in driving a rwd car) but I still span out. It took me by surprise as I was being cautious and didnt expect this so I span without correcting . Was doing about 40km/h.... first thought was I hydroplaned....

Yesterday it was pouring again , remembering my last experience I went even slower this time , but wasnt taking a right like before and was going straight through the roundabout , so a slight turn of the steering wheel was all that was needed. I was doing about 35km/h. Without warning after i turned , the back end slipped out,this time i was more prepared....so i corrected but my god that took me by surprise.

I dont feel i have the skills to get myself out of trouble should this happen again with traffic around....

What would be cause this to happen? Coil overs? My missus car can go straight through a roundabout in the rain doing 40km and not spin out....why is the line so shit in rainy weather....to the point of being dangerous

This has only started happening since i got coilovers(which virtually eliminated body roll)...im quite sure that the act that I have a much lower center of gravity has something to do with it but how exactly... whats the physics behind this? I assumed having no body roll was a good thing , but now in the wet I have to take corners slower!

And what can I do to avoid slipping out in the wet all the dam time - already have fat 265's in the rear

Cheers

Link to comment
https://www.sau.com.au/forums/topic/407716-so-i-spun-out-again-wtf-is-going-on/
Share on other sites

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Hey Guys

Car: 1997 R33 S2 GTST

Tyres : 265's x9 rear and 235 x 8.5 front and decent tyres as well

Suspension : Pedders Coilovers

This has only started happening since i got coilovers...

Cheers

This must be totally unnerving for you whilst you have a car that would predictably corner much better than most.

Obviously you had Pedders supply and fit these coilovers?

Did they tighten everything up?

Have you had your wheels realigned by them too?

Did they do a complimentary multipoint check?

It sounds like there's basically no weight transfer at all in your set up.

If your springs & shocks are too stiff; you'll get no warning when it's about to break away.

No body roll is not necessarily a recipe for good handling; there has to be some compliance; otherwise the car won't absorb any bumps, it just bounces over them.

No wheel on the ground; no traction from that wheel. Doesn't matter how wide your tyres are then.

Do the coilovers have adjustable damping? What are the spring rates?

I'm better you have poor tyres combined with suspension too hard makes for a difficult life.

I could drive my GTS-R in pissing rain, with 245/255s on the rear and 370rwkw - not having an issue at all with spinning out. The suspension was as hard as a rock with virtually no movement in it at all (12/10kg springs). Difference was I was spending $300 a tyre.

My money is on shit tyres. What are they?

Pedders coilovers arent harder than some jap spec ones. So Im declined to blame that.

My mates 32 had a problem with spinning around spontaneously, but his hicas light was intermittently on. So we blamed that.

But for you, Get some better tyres. Or go and do a defensive driving course, as you will hurt yourself or worse others. You need to learn to drive that thing.

Do you accelerate out of the roundabout when this spin around occurs?

When you think about it, 40km/h is bloody fast on a tight roundabout.

Skinny tyres are far better in the wet. Wide, cheap, worn tyres in the wet will grip as much as a bucket of eels in whale snot.

Wouldn't be suprised if someone has taken the swaybars off the car.

Also, get under the car and have a look at the chassis rails and make sure theyre nice and straight.

maybe who ever did that threw them over a Nissan Dealer

My liner was shit in the wet, used to slide stupidly without wanting to but nothing some counter steer wont fix,

changed to Federal 595RSR's and its been sticking very well im comfortable enough in the wet to

give it some where i wouldn't have before.

Wouldn't be suprised if someone has taken the swaybars off the car.

Also, get under the car and have a look at the chassis rails and make sure theyre nice and straight.

Taking the swaybars off will actually let the car float around a little more.

I know a few GT-R owners who will drop/loosen the front swaybar if it's really wet at a track day to get more weight moving :thumbsup:

Front and rear strut brace and sway bars make a huge difference and some great set of tyres.

These stiffen the car up, especially with stiffer/upgraded rear sway bar, which tends to reduce under steer thus promoting over steer.

90% of it sounds like your skill as a driver. Skylines are tail happy cars, poor tyres, wide tyres, and stiff suspension definitely won't help. But they're just tail happy by design.

Tips: Corner as smooth as you can, don't jerk the steering wheel (I'm sure you're not JERKING it per say, but just try and be more smooth); and practice smooth throttle control. It'll still be a little difficult to control as stated above they're just a tail happy car. But in the wet you simply just have to have to drive like a grandma. Smooth throttle, smooth steering and you'll be fine.

There also becomes a point where wide tyres don't help you in the wet, I'm not sure of the exact threshold... but yeah there becomes a point where it's actually detrimental for grip in the wet.

edit: Or just buy an AWD car. :D

Edited by RB25PWR

But in the wet you simply just have to have to drive like a grandma. Smooth throttle, smooth steering and you'll be fine.

Or just buy an AWD car. :D

This.

I went from driving a WRX to a Skyline and knew nothing of the oversteer.

After you realise how little throttle you need to get all Tokyo Drift, you adjust your driving style.

So in conclusion.

EN1cT.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (掳C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
  • Create New...