Jump to content
SAU Community

Long Distance/interstate Drive In Skyline

scr33

By scr33,
in Victoria

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

You saying the varex's are illegal vic or nsw? (ive heard whispers around the laws on them) but assuming its the adjustable butterfly valve in this mufflers that are changing the noise level is the main culprit.

I find it funny when you can buy any HSV,be it a Clubby or GTS etc they all are optioned with an exhaust that has 2 adjustable mufflers and yet thats doesnt seem to be a problem with the rozors.

OEM / ECU controlled.

vs

Aftermarket / User controlled.

Totally different.

  • Like 1
t_revz Grand Master

t_revz

Posted
Posted

The attitude of the police towards JDM cars compared to the aussie holden or ford is amazing.

True but it mostly comes down to driver attitude whether they do anything once they pull you over.

I've had mine 10 years this summer and never been inspected. Heaps of rbt's with no issue. Even once told they see me around regularly and I'm always doing the right thing.

Was mistakenly pulled over for hoon laws as they saw smoke and assumed it was me. Explained respectfully that it wasn't me and they only inspected my rear tires and went on their way.

  • Like 1
ARTZ Grand Master

ARTZ

Posted
Posted

My exhaust didn't bother me one bit surprisingly (3.5inch legalis) and I'm used to driving the Honda which is like driving on a cloud in comparison..

We did have a full boot and back seat though maybe this helped to muffle some noise..or maybe you just have a shitty exhaust Ash. :P

  • Like 1
HEKT1K Grand Master

HEKT1K

Posted
Posted

Melbourne to Sydney, then back again, for world time attack.

Would gladly do it again, R33 didn't miss a beat. went with a mate, having someone to talk to / share driving certainly helped

bluey33 Experienced

bluey33

Posted
Posted

Melbourne to Brisbane done over 4 weeks.

7,500-8,000km done in total.

Started off with 350 to the tank but fixed that whilst away and was getting 550-600.

Would do it again but in saying that next time would love to take 4x4 and go more places and do more camping. (So not with the mrs next time lol)

Hotels and cabins get expensive along with 98 fuel.

Birds Grand Master

Birds

Posted
Posted

I think because of the "Skyline paranoia", i.e. imaginary and real squeaks/creaks/knocks, I have this fear that my car would break down somewhere along the way of a long trip...but the reality is probably closer to these cars being more reliable for the job than a lot of alternatives. We service them more often than we need to, replace wearing parts and are generally more attentive to them than the average vehicle owner!

llama_au Grand Master

llama_au

Posted
Posted (edited)

I'd done Melbourne to Adelaide twice in my Pulsar. The longest drive I've done though was Melbourne to Wagga Wagga and back in one day (1000km round trip) in my R34. Pretty rubbish fuel economy but otherwise handled the task pretty well. I don't think the car is the biggest factor in a long drive, I've never had cruise control. I find staying alert when you're driving alone the hardest thing, no such issues with a passenger talking and keeping your brain active and alert. I stupidly only stopped once on my solo trip back from Adelaide and I was hallucinating from tiredness and staring at the road for so long. Could have ended badly.

Edited by llama_au
Birds Grand Master

Birds

Posted
Posted

^I usually do deca and back in the one drive...the drive home is usually very bad and my passengers usually fall asleep on me, instead of distracting me from sleep :/

llama_au Grand Master

llama_au

Posted
Posted

^I usually do deca and back in the one drive...the drive home is usually very bad and my passengers usually fall asleep on me, instead of distracting me from sleep :/

I do find just having someone there keeps you more alert though. I've never had a passenger for any of the trips and sometimes it's got a little scary on the way back.

Cassbo Grand Master

Cassbo

Posted
Posted

^I usually do deca and back in the one drive...the drive home is usually very bad and my passengers usually fall asleep on me, instead of distracting me from sleep :/

Actually, last year I spend the night in Albury, drove to Winton, spent the day racing around Winton and drove back to Sydney in the same day. Never again... I wanted to kill myself by Marluan

Work the next day was death as well...

Interloper Veteran

Interloper

Posted
Posted

Pickup up my 32 in Adelaide and drove back to Geelong.

Was a good way to familiarise myself with the car, wasn't sure about fuel economy so i stopped a couple of extra times, but was all good and a nice drive too, except for the vic bacon waiting just over the border, great welcoming committee. They didn't get me but thats not the point.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GoHashiriya
      R34 Skyline Sunroof Won't Tilt/Vent

      By GoHashiriya · Posted

      Actually, that's not entirely true. It's also the same motor in the 1st gen Nissan Cube but they're rare as hen's teeth.  
    • Duncan
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By Duncan · Posted

      Yeah it is always worth testing and balancing actuators out of the box, just set the pressure regulator on a compressor very low (eg 5 psi) and increase it slowly to see when they both move.....unfortunately while you may be able to adjust the length of the actuator rod to minimise any difference, the actual pressure they move from is not adjustable so you need a well matched pair. And yes, the VCAM is probably contributing; the earlier in the rev range they come on boost and the slower the revs build (I think your demo was in 5th), the more you notice it.  Driving at WOT through 1st, 2nd, 3rd etc you will probably never hear it as any shuffling starts and is over super quickly
    • Dose Pipe Sutututu
      Shoota's R33 GT-R RB30/26

      By Dose Pipe Sutututu · Posted

      oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • GoHashiriya
      R34 Skyline Sunroof Won't Tilt/Vent

      By GoHashiriya · Posted

      I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
×
×
  • Create New...