Jump to content
SAU Community

Cruise Control Sales/install - Melbourne

180Shauny

By 180Shauny,
in Four Door Family & Wagoneers

 Share

Recommended Posts

AAA34T Community Regular

AAA34T

Posted
Posted

Try calling a company called cruise control specialist in sydney see if he has a contact in melbourne. or a company called autron in melbourne they sell cruise controls they might have a reccomended installer.

Commsman Veteran

Commsman

Posted
Posted

The ones I supplied were AP-900C as sold here by C0mmand. The 'C' is for CAN-bus, but that part didn't work in our favour, so the (cheaper?) AP-900 will do.

If you get someone to supply/install one for you, get them to leave the stalk unmounted. Nicest result is with the backlit steering wheel controls. Can buy them from Nissan for $75 - $80, & that includes the stereo controls as well - ie both sides of the wheel have buttons.

The AP900 is user programmable for response/overrun etc. Very handy if you make changes to your car (especially different turbo) as it allows you to change the settings to suit yourself.

Chris' kit should come with steering wheel controls, but they are the older style (from what I have heard/seen in the past) & don't come with LED backlighting. Not a big deal I suppose, but those of us with the newer switches really appreciate not having to remember what button does what in the dark.

I heard from a M35 owner in the Newcastle area who found someone to supply & install one like mine for ~$750 (no switches), & I thought that was a pretyy good deal for a locally sourced unit.

If you don't want to think for yourself & do much chasing around, then get one from Chris as it will work fine.

Before I bought 20 in from the manufacturer, Chris didn't allow DIY install on his, & the installed cost was $900. I wouldn't have bothered if I could have bought his kit for ~$700 & installed it myself. Looks like he changed his mind.

In case you are wondering, most people bought mine for <$500 inc switches

pv35gt8 Collaborator

pv35gt8

Posted
Posted

I recently had the Command AP900 system fitted to my car for $750, Freeway Car Audio in Dandenong.

They will probably want to check the car out first to make sure/double check wire colours for the harness.

The kit I got has the RF controller, no stalk at all and the passengers in the back can set the cruise.

iamhe77 Grand Master

iamhe77

Posted
Posted

I recently had the Command AP900 system fitted to my car for $750, Freeway Car Audio in Dandenong.

They will probably want to check the car out first to make sure/double check wire colours for the harness.

The kit I got has the RF controller, no stalk at all and the passengers in the back can set the cruise.

Noted :ninja:

Commsman Veteran

Commsman

Posted
Posted

I recently had the Command AP900 system fitted to my car for $750, Freeway Car Audio in Dandenong.

They will probably want to check the car out first to make sure/double check wire colours for the harness.

The kit I got has the RF controller, no stalk at all and the passengers in the back can set the cruise.

That's a good price, for Aust supplied retail.

Not sure about the controller tho. Besides not wanting anyone else playing with the CC whilst I'm driving, it will need batteries every now & then. I had a few C0mmand IR controllers on my work car stop working (break) before I tossed the lot out. Your RF one may be more reliable, but I like that the factory switches are good quality, wired in & just for the driver, lol.

Commsman Veteran

Commsman

Posted
Posted

It took about 3-4 hours from memory.

That's pretty standard for 1st time. (It took me >2 months to get mine going initially, haha).

Like anything, subsequent times would be much less, ie <2hrs.

pv35gt8 Collaborator

pv35gt8

Posted
Posted

Not sure about the controller tho. Besides not wanting anyone else playing with the CC whilst I'm driving, it will need batteries every now & then. I had a few C0mmand IR controllers on my work car stop working (break) before I tossed the lot out. Your RF one may be more reliable, but I like that the factory switches are good quality, wired in & just for the driver, lol.

The factory switches are the reason why I went for the RF remote, once installed I will be able to throw the RF controller in the glove box and forget.

Commsman Veteran

Commsman

Posted
Posted

The factory switches are the reason why I went for the RF remote, once installed I will be able to throw the RF controller in the glove box and forget.

Ahh, I see. Good choice :)

If you need any info/help on setting up the switches, read my thread on m35stagea.info or message me.

180Shauny Enthusiast

180Shauny

Posted
  • Author
Posted

Wow thanks for the in depth info guys. So far I have rung Autron and their Melbourne installer No Limit want $880 to supply and fit an Autron cruise complete with the little control button box to go on the side of the wheel or a stalk.

Chris charges $710 delivered for his cruise which includes the Nissan switches (can't confirm if backlit or not), he said it was a Lawrence & Pederson unit that is commercially fitted to a number of vehicle brands.

The deal from Freeway Car Audio seems pretty good then, I guess the only thing I'm thinking now is, if I DIY my cruise, sell the car and it malfunctions, who's arse is going to get kicked for it? Is there legislation covering the installation of cruise controls?

180Shauny Enthusiast

180Shauny

Posted
  • Author
Posted

So I rang Freeway, they quoted $690 installed for the CP900 which seems very reasonable.

I'd probably just get them to fit the stalk as I'm used to a stalk and think it is the most ergonomic arrangement for my hand when my arm is resting on the armrest whilst cruising. You can just adjust it with your fingertips instead of having to move your hand onto the wheel centre itself. Just my 2c of human factors engineering.

PV were you satisfied with the workmanship and the quality of kit itself?

Commsman Veteran

Commsman

Posted
Posted

So I rang Freeway, they quoted $690 installed for the CP900 which seems very reasonable.

I'd probably just get them to fit the stalk as I'm used to a stalk and think it is the most ergonomic arrangement for my hand when my arm is resting on the armrest whilst cruising. You can just adjust it with your fingertips instead of having to move your hand onto the wheel centre itself. Just my 2c of human factors engineering.

PV were you satisfied with the workmanship and the quality of kit itself?

CP900 or AP900?

In any case - good price for installed cruise, especially if you want to use the stalk. I think there's really only one spot to successfully mount the stalk & Andrew's turned out good in that regard.

Not sure about ergonomics, but if it's good enough for the factory...

post-76144-0-06786300-1351135826_thumb.jpg

Plus you get audio controls thrown in. That's worth the effort IMO.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...