Jump to content
SAU Community

Recommended Posts

I love Sepang and I can't wait for this weekend to come around. Apart from too much rain there isn't much that is going to ruin this weekend for me. If Roy can will the Chin off the line this week, get Homoton and SebVet to tangle and at least one spin from Massa in the wet my weekend with be a royal flush.

right, streaming worked great but next big question time. I'm based out of germany for work for the next few months & I need me some real life gp's. Who's been where & whats recommended? Will be myself & my wife, looking for stands & happy to fly or drive out of germany.

Shattered the german gp's been moved to cologne this year too but will probably still go.

cheers, Tim

Monza is fun but shit viewing and run by Italians so ... ummm. Spa is again not great for viewing as its a big open track though seats on the entry to Pouhon are cool. Hungary is way good for stands where you see plenty of track. Personally i would go to Hungary, German and Belgian GPs...Monza may keep the Mrs happy but without kanga tv this year i think any live gp will be a challenge for understanding the race

But it would be worse then Aus GP for viewing...surely? Thats why I have never gone. All that money to sit in seats where cars blaze by and you see them for 3 seconds per lap? The atmosphere may be cool...but for a single bloke Hungary has a lot more obtainable talent on display

My missus didn't rate Monza. Fawking hot, and the toilets are fkn appalling. They don't clean them until they're hosed out on Monday it seems. Putrid rancid mess.

We had outside turn 1 seating, Pretty good view with lots of action in the chicane...... but post race we left immediately as there isn't much to hang about for as the joint is a fair old mess and everyone speaks this stupid fkn language that I don't understand.

My missus didn't rate Monza. Fawking hot, and the toilets are fkn appalling. They don't clean them until they're hosed out on Monday it seems. Putrid rancid mess.

We had outside turn 1 seating, Pretty good view with lots of action in the chicane...... but post race we left immediately as there isn't much to hang about for as the joint is a fair old mess and everyone speaks this stupid fkn language that I don't understand.

Milan and shopping I thought would keep most ladies happy. Food was good, Accom pretty cheap...but yes, the GP is a bit meh having been to other European GPs and race meets where things are actually organised. You sat where I was meant to but got dicked as they moved the colleciton stand for my tickets without telling anyone and nobody actually knew at the track. Was a joke and a good way to blow $600-800 or whatever it cost

Though I should point out I think there are 4 functioning toilet seats in Portugal. Every damn toilet seems to be missing the seat....and there was one time where I had to build a nest out of toilet paper just so my petite bottom didn’t freeze on the cold porcelain.

where's the pics of the monster energy girls???

I went past - omg.

Ass was hanging our the bottom of every skirt. Unfortunately it got cold and more clothes went on, but at the start of the day it was a sight to see...

Milan and shopping I thought would keep most ladies happy. Food was good, Accom pretty cheap...but yes, the GP is a bit meh having been to other European GPs and race meets where things are actually organised. You sat where I was meant to but got dicked as they moved the colleciton stand for my tickets without telling anyone and nobody actually knew at the track. Was a joke and a good way to blow $600-800 or whatever it cost

Though I should point out I think there are 4 functioning toilet seats in Portugal. Every damn toilet seems to be missing the seat....and there was one time where I had to build a nest out of toilet paper just so my petite bottom didn’t freeze on the cold porcelain.

Correct on all counts Roy.

Are we to now call you, The Cassowary?

My missus didn't rate Monza. Fawking hot, and the toilets are fkn appalling. They don't clean them until they're hosed out on Monday it seems. Putrid rancid mess.

I noticed this once in Venezia > I finally found the foot-operated flush lever.

But it would be worse then Aus GP for viewing...surely? Thats why I have never gone. All that money to sit in seats where cars blaze by and you see them for 3 seconds per lap? The atmosphere may be cool...but for a single bloke Hungary has a lot more obtainable talent on display

Bris - 2014 Russian GP.

Lets mark it down now. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...