Jump to content
SAU Community

Recommended Posts

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Hi Steve

IMO the most cost effective solution is to pull it out & send it off to be hi-flowed - search on here for Stao from Hypergear for starters - but there are others depending on where you live.

There's a few options depending on what you want in the way of power. There's supposed to be a 'close to stock' version too, but i haven't heard much about it yet.

Cost will be close to $1000 plus labour if you can't remove & fit it yourself.

Link to comment
https://www.sau.com.au/forums/topic/414678-blown-turbo-m35/#findComment-6648085
Share on other sites

Where are you Steve? In NSW I charge $650 for labour and can organise the parts at your expense. Or in Vic contact Scott. In other states get a quote but a good mechanic should charge you about the same.

P.s the cheapest options for turbos is not always the best. You need to get one that suits the m35.

If your in a hurry so you cars right for Xmas Scott or myself can organise for it to be done by next weekend....that's if your in NSW! Give me a ring if needed...my number is in my profile.

Cheers craig

Edited by Jetwreck
Link to comment
https://www.sau.com.au/forums/topic/414678-blown-turbo-m35/#findComment-6648159
Share on other sites

Where are you Steve? In NSW I charge $650 for labour and can organise the parts at your expense. Or in Vic contact Scott. In other states get a quote but a good mechanic should charge you about the same.

P.s the cheapest options for turbos is not always the best. You need to get one that suits the m35.

If your in a hurry so you cars right for Xmas Scott or myself can organise for it to be done by next weekend....that's if your in NSW! Give me a ring if needed...my number is in my profile.

Cheers craig

QFT.

I heartily recommend the Precision Turbochargers Sierra Stage 2; mine ran a 13.8 at Eastern Creek with basic mods, a stock intercooler, ecu, and fuel pump.

It is the shizz.

Link to comment
https://www.sau.com.au/forums/topic/414678-blown-turbo-m35/#findComment-6648218
Share on other sites

Hi Steve

IMO the most cost effective solution is to pull it out & send it off to be hi-flowed - search on here for Stao from Hypergear for starters - but there are others depending on where you live.

There's a few options depending on what you want in the way of power. There's supposed to be a 'close to stock' version too, but i haven't heard much about it yet.

Cost will be close to $1000 plus labour if you can't remove & fit it yourself.

Thanks ill look in to it

Link to comment
https://www.sau.com.au/forums/topic/414678-blown-turbo-m35/#findComment-6648268
Share on other sites

I've just had a reply from hyper gear for 880 to

hi flow but ill need to send it to Vic...

Witch will mean I won't have a car of Xmas

Like I mentioned above I can get you on the road by the end of next weekend. You just need to contact me. Only problem is is that I won't use hype gear. My builder is in Sydney and he can turn it around in a day if his not busy.

Edited by Jetwreck
Link to comment
https://www.sau.com.au/forums/topic/414678-blown-turbo-m35/#findComment-6648716
Share on other sites

Anybody know a model number of the turbo maybe can get a match

Nissan will sell you a brand new one; just lob up to a Nissan dealer, and give them your VIN.

You might want to take your own chair, because it's a good idea to be seated when they tell you the price. ;)

Highflow the stock one mate; it's the best option.

Edited by Daleo
Link to comment
https://www.sau.com.au/forums/topic/414678-blown-turbo-m35/#findComment-6649582
Share on other sites

Nissan will sell you a brand new one; just lob up to a Nissan dealer, and give them your VIN.

You might want to take your own chair, because it's a good idea to be seated when they tell you the price. ;)

Highflow the stock one mate; it's the best option.

Lol

Thanks for the heads up

Link to comment
https://www.sau.com.au/forums/topic/414678-blown-turbo-m35/#findComment-6649605
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...