Jump to content
SAU Community

Recommended Posts

Sure.

It's a super fine version of sand blasting. Most of the blasting material is water which means it can be used on the super soft metals. The guy then adds various different elements to the water to alter the abrasive effect. He uses a lot of the normal blasting medium (sand, walnut, etc). He normally hits it with the harsher abrasive first to clean it up then finishes it off with the fine stuff to create the like new finish.

I had 2 rocker covers, 2 cam gear covers, 4 exhaust manifold heat covers, 2 engine mounts, coolant and oil hard lines, inlet manifold plenum plus a few other random bits and it cost me $125.

The guy is here in Melbourne. His company is Auld Tyme Auto Resto Services and Wayne is the man to speak to. His number is 0416310662. Very nice guy and even picks up and drops off if he's in the area.

Highly recommend his work!

  • 3 weeks later...

So after about 7 or 8 weeks wait, my sexy, sexy slugs arrived-

20F75A88-CB35-4C0B-8E66-E8C5B3849856-300

3AD47DC3-252C-4E0D-B941-3B12FE26E8C5-300

65320665-0305-4CDC-A4DC-C99BF4E92D72-300

That's the positive side of things.

Negatives? I had hand surgery last week to fix some thrashed ligaments in my fingers and thumb from old footy injuries.

Suffice to say I'll be out of action for a while..

9FCBD147-F6B7-418D-8A4E-73F3750C7E18-300

7B7F67A0-AE6B-4E40-9C5B-24C66B758DFE-300

Might also be moving from Melbourne back to Shepparton soon which will be a bit of a speed hump as well. Until I get my 3 bay shed built with barn section in the middle to allow for a hoist........ can't wait.

Be great to be 3 kms from DECA and a lot closer to Winton too!!

Hooray for the pistons turning up!

Not so much for the hand surgery.....does not look enjoyable! Coincidentally my old man just had surgery to fix his carpal tunnel syndrome in his right wrist. Apparently its quite common in mechanics and tradies who often use hand tools. Shunting spanners, ratchets and breaker bars with the palm of your hand to crack nuts/bolts is a primary cause! So there is something to be weary of in the future!

  • 3 weeks later...

So officially moving back to Shepparton now. Gunna be a massive pain in my motivation.

New job, renting house with no shed until new house/shed built, another baby on the way, it's all happening! Will need to try VERY hard to keep on track. Won't get anything done until after the move because of my hand surgery.

Once shed is built and car is finished it will be awesome being back in Shepp. DECA, Winton, back roads!

I'll be working as sales manager for Subaru, Jeep, Dodge, Chrysler, Alfa, Fiat and Mercedes so if anyone needs a new car.....

  • 2 months later...

Long time no post! Been busy with busted hand, moving from Melbourne to Shepparton, new job, new rental house, building new house, etc etc.

Finally started on the car again last week. The engine should be finished the machining stage next week and then I just need to go and pick it all up then start bolting it together.

This is all I've done lately-

Started making the bolt ons-

null-6.jpg

These, look pretty-

null-7.jpg

null-13.jpg

null-14.jpg

Hopefully more to come soon.

Got a few photos of the machining process.

Bore and hone of block, head ported a little bit, head machined for 1mm oversize valves, block drilled for RB26 headstuds, reliefs grounds for sump adapter allen head bolts, Hardblok up to bottom of lower welch plug holes plus a few other bits and pieces-

dn1.jpg

dn7.jpg

dn.jpg

dn6.jpg

dn7.jpg

dn3.jpg

dn2.jpg

dn4.jpg

  • 4 weeks later...

Finally all of the machining work is done on my engine so I drove to Melbourne today to pick it all up.

Set up the "operating theatre" ready for business-

20130804_155258.jpg

All the goodies-

20130804_161506.jpg

Pistons individually weight matched (blueprinted in other words)

20130804_155931.jpg

Oversized valves in-

20130804_161759.jpg

20130804_161826.jpg

Tomei Poncams-

20130804_161919.jpg

Oil return galleries enlarged-

20130804_162019.jpg

Intakes opened and tidied up a bit-

20130804_162130.jpg

Exhaust ports opened up a bit-

20130804_162242.jpg

Spacer for timing belt tensioner-

20130804_163137.jpg

What all GT-R's should have had from factory.....-

20130804_163338.jpg

That's everything that the machinists have done, now it's my turn.

Didn't waste too much time on it but gave the crankcase a bit of a tidy up-

20130804_180423.jpg

20130804_180436.jpg

Also opened up the oil return galleries in the block to match the head gasket. The block opening is about 6mm smaller than the gasket which is just bloody stupid!-

20130804_182644.jpg

20130804_182657.jpg

Also opened up the water galleries in the block as well. you can't really tell but I've done the main curved bore water galleries as well-

20130804_182725.jpg

That's all I got done today, still a bit more cleaning up and measuring before I start assembly. Sorry for the photo overkill!

  • Like 1

I had an SR20DET that I was going to put into my other 1200 but reallocated all the funds to the Skyline. I'll revisit that project again at some point. When I have money again. Ie. never!

Great read mate, looks like it will be a very well rounded engine when its done. Great to see you doing it all yourself, would love to have the skillset that allows me to build my own engines!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...