Jump to content
SAU Community

Recommended Posts

Hey guys,

this is a thread to share updates on mods and work you've been doing on your V-Series.

I'll kick it off.

Fitted a BlackVue DR400G-HD2 Camera to my car - living in Melbourne I've had 3 cars vandalised in the past 10 years. Using motion sensors, this camera will record video activity sequences that go on around my car when it's parked. It also records video and audio when you're driving, including speed and exact GPS location - both features which would come very much in hand if you have to file or dispute an insurance claim. Coupled to an alarm and immobiliser, it just helps me sleep at night a little easier :thumbsup:

http://www.autoblackbox.com.au/index.php?route=product/product&product_id=83

84370925_1_644x461_videoregistrator-blackvue-dr400g-hd-ii-versiya-2-16gb-novyy-sankt-peterburg.jpg

gshack_BlackVue_Install-021-620x250.jpg

That's really cool, great idea.

Well for me, not so much what i've done today but what i am doing on the weekend is an oil change and brake fluid change. Then hopefully in 2-3 weeks time i'll be purchasing my new CD009 gearbox clutch & flywheel and i'm pretty damn excited for that!

This week.

k'n'n drop in's

Removed nissan badge from the boot.

Professional detail and polish removing tar and metal flakes and leather treatment.

Tinting and 4 new goodyear directional 5's

Target now is to get the cart paid of then full stainless invidea exhaust and kinetix cats.

I pumped up my front left Tyre!

Well, not to amazing, however I only knew the front ,left was low because a few weeks ago i "installed" a tyredog remote pressure sensors. I bought it on eBay, and wish I had had it a few months earlier. I lost pressure in my front right, and didn't realise till a few KM's later. Enough to put a big dent in the rim, basically forcing me to get new rims (expensive). If anyone was hesitating about getting this, I would say go-ahead. Its a simple "install", you simply put on these special valve caps put a battery in and your away. It was interesting to see that the Tyredog was showing 27psi and the digital pump at the station also said 27psi.

bought a VLSD out of a 350Z to replace the 3.3 open in my 250GT, having it shimmed and installed maybe get a nismo finned diff housing.. getting a transmission fluid change, engine oil and filter change and having the brakes adjusted.

I replaced my engine oil last night, so difficult when my car is low as f*ck had to drive the car up on bits of wood to fit the jack in..

Still need to change the filter, i didn't end up finishing the change until about 7:30 last night and i was tired as f*ck so i thought i'd do it next oil change.

Is it normal for my car to use 1L of engine oil in about 7,000km?

Yeh , Sean I'd go grab a set of those $100 ramps from Repco, the ones with the lowered car extensions - the standard ones are useless for a lowered car.

Safety first, bro. I have done some stupid sh1t working under cars in the past, and been very lucky a couple of times.

I don't take risks anymore after a friend of mine's husband had his car fall on him in his garage - she didn't find him for a couple of hours - but they are pretty confident he was killed instantly.

I'll add it to the wish list Mat, I had the front of the car on chassis stands so i don't believe it was very risky but i do understand what you are saying. I do get nervous every now and then about that sort of shit happening.

That's horrible to hear, i can't imagine that sight.

But in response to my question before, i have used just over 1L of oil in around 7,000km.. i have heard some of the motors in the states were recalled for bad oil consumption. Is this something to worry about?

Edited by Seano350GT

Because i had a big day yesterday i was buggered, changed the oil and couldn't be bothered f*cking around trying to take the filter off because of it's position and the sump cover in the way so i put it in the too hard basket until probably this weekend.

Nice nuts Mat.

Sean, we give to strife because we can.

I get the car on ramps, take off cover, move tray under sump, remove plug, try to catch plug, remove filter and go have a smoke. That usually does it. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • PRICE  : $1400 LOCATION   : NSW Central Coast FIT  :  All Nissan 350Z type Z33 and Infinity G35 Coupe. See delivery note. Hi, brand new, unused, still in the box.  ($1850.00 is what i paid ) My bad luck !!! I thought my right front  Bilstein was cactus so i bought the ST 's to replace all.  Turns out the right front is fine ( loose mounting after service  by a well known importer of Bilsteins ) So im selling the ST's. They are made by KW ( no intro needed ) . Iam on the Central Coast and im willing to meet up in Sydney metro, within reason and Newcastle.
    • Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
×
×
  • Create New...