Jump to content
SAU Community

Recommended Posts

I have an Apexi Power FC to suit R34 GTR, in excellent condition. No longer required due to upgrade but came out of running car. Does not come with handcontroller.

$690 inc postage to any Australian capital city.

Pics available on request.

Located in Brisbane.

Contact via PM or sms on 0402 421 437.

I have a used paiir of Garrett 2860-5 (Dash 5) turbos off my R32 GTR. These are in excellent condition and have only been on the car for a few months. No longer required as I am in the process of upgrading to a single turbo for more horsepowers.

Price is for the pair of turbos only, however I have stainless dump pipes and y-pipe available as well as a Greddy piping kit that are also going up for sale so if you are interested in these also I can work out a package price.

Price is $1900 for the pair. Located in Brisbane but can freight at buyers expense.

Pics will be posted shortly.

Contact via PM or sms on 0402 421 437.

For sale, VGC Hypertune intake manifold to suit RB26 whilst retaining the factory individual throttle bodies. This is to maintain throttle response yet even out the airflow to all six cylinders. Excellent finish on this product and it is sure to impress in any engine bay.

Location: Brisbane (Can post at buyers expense)

Condition: Excellent

Price: $1500

Contact: via PM or sms on 0402 421 437

post-107125-0-70698500-1360018599_thumb.jpg

I have a used 24U block, in excellent condition and ready to be used in any serious GTR application. It is well documented that these are stronger than the 05U block and in this case, much cheaper than buying a brand new one!

Comes with ARP main stud kit - also used.

Condition: used but VGC

Location: Brisbane

Price: $1700 ono

Contact: Via PM or sms on 0402 421 437

pics available on request (yes it looks like an RB26 block! ;P )

Full set of Tomei forged pistons for RB26 brand new in the box never been used. These are plus 20thou (86.5mm). Includes pistons, rings, pins and locks. To suit std stroke rb26. Cost $1700 brand new.

Condition: new -perfect

Price: $990 ono

Location : brisbane

Contact: PM or sms 0402 421 437

  • 2 weeks later...
  • 2 weeks later...

N1 Block Sold

Tomei Pistons Sold

Dash 5 Turbos still SOLD

STILL AVAILABLE ARE THE FOLLOWING 2nd hand parts:-

HKS 2530's for RB26 - low km's, perfect condition. $2500 ono

CES competition dump pipes, HPC coated (black), with 3" outlet. Also includes CES stainless Y-Pipe for twin 3" into 4" for the ultimate dump pipe setup for an RB26. Cost over $1600, have had dumps recoated so they look brand new! $1100 ono.

HKS Cat back exhaust suit R32 GTR - stainless steel $550

Trust 617z twin turbo kit for RB26 complete with std manifolds, no-name dump pipes and all lines $2900 ono

ORC twin plate clutch - push type Excellent condition $1900 ono

OS Giken twin plate clutch - push type VGC $1500ono

R33 GTR Gearbox - pull type $990 ono

Sard 700cc drop in injectors - RB26 (top feed) $440ono

Splitfire coilpacks - R33 S2 or R34 GTR (dis-005) $450

Trust 115mm Intercooler for GTR (32/33/34) $1100

Trust R32 GTR hard piping kit (lower pipes) $500

Vipec plug in ECU for R32/R33 GTR $1400 in case ready to go!!

R34 GTR Power FC - no controller $690 ono

Nismo engine mounts and gearbox mount - 2nd hand to suit RB26 $250 for the set

Nismo in tank fuel pump kit to suit R32 GTR $200

Nismo RB26 regulator $60

R34 GTR front seats (pair) $1500 - slight tear on drivers seat but easily fixed

R32 GTR seats - some material damage $300 for the pair

R33 Brembo brake callipers - front pair $800 ono (if you want brand new DBA4000 slotted rotors, add $500 for the pair)

RB26 Long Engine with intake manifold - genuine 80,000km, build date 09/94 with long nose crank. Painted blue covers, adjustable camgears, clear timing cover, still in car running and can provide compression test results. Never boosted over 18psi. Extremely tidy looking engine. Can come with PS pump, AC, alternator etc. Just no turbo side. $3500 ono

R32 GTR engine wiring loom, including injector loom and coilpack loom $450 ono

R32 GTR Alloy Bonnet - white VGC $600 ono

R32 GTR Headlights $400 pair ono

R32 GTR indicators $200 pair ono

R32 GTR alloy drivers side guard - white $200 ono

R32 GTR alloy boot lid - low spoiler, std holes filled $400 ono

R32 GTR fibreglass Trust front bar - white, some cracks $250 ono

R32 GTR doors - pair - blue - includes glass $600 ono

R32 GTR rear cradle, diff, axles, hand brake cables and half shafts $750 ono (rear brakes not included)

Location : brisbane
Contact: PM or sms 0402 421 437

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...