Jump to content
SAU Community

Recommended Posts

I saw those on ebay (they come in other colours as well) and I was wondering who would be the first one in the Skyline community to have one on there car - I should have guessed it would be Duncan :bunny:

haha that is pretty bright. maybe fluro orange te37s?

on a more serious topic, we got our hands on these the other week and installed them over the weekend. Blitz ZZR setup

leaf_zzr.jpg

leaf_zzr_front.jpg

leaf_zzr_rear.jpg

Hopefully none of this was important....can't read a word

leaf_zzr_instructions.jpg

The install was easy (and damn, how much cleaner is an electric car with 3,000klm compared to a ute with 500,000klm!).

Excellent improvements, it's gone from a soft and rolly hatchback to reasonably acceptable handling.

Interesting question mate...and over time I should be able to answer it. The carwings setup records each journey and average economy, so I should be able to compare pre and post suspension change once there is a decent amount of average data

This setup is 30% lighter (and you would normally count half the suspension as "unsprung") and 30mm lower which would both normally help economy.

But the interesting thing is, pretty much everyone is interested in the range and impact on range of doing things to this car. If you take a step back, who here has ever thought twice about fuel economy before changing shocks? or an airbox, exhaust, cooler etc etc. To me the car can be improved for my preferences by modifying it instead of sticking with the factory compromises. If I have lost 1-2klm (1%) of range from any given change it is kind of irrelevant. I am more concerned about when I change the tyres from eco to grippy ones, that could have a 5 or maybe even 10% impact.

I suspect I will get less range now because it is much more fun to drive fast ;)

What is this thing called fuel consumption????????

If you drive a performance car fuel consumption is the last thing on your mind.

Not necessarily.

I see cars all the time that just have a "full power tune" where the tuner has just kept hitting the 'up' button until it was running 10:1, and then passed it off as a "safe" tune. My fuel gauge goes up when I follow those cars because they spew out so much unburnt fuel (ok, slight exaggeration).

While it's absolutely unavoidable that you have to burn fuel to make power, and a more powerful car will drink more when you are up it, there's no reason why you should be wasting fuel willy nilly, unless you're really pushing extremes in which case it's barely a road car any more.

Nothing to do with my car....but this is an interesting idea: http://smh.drive.com.au/motor-news/formula-ones-electric-rival-20130516-2jp0h.html

Very interesting. Watching the EV industry to see what after market industry springs up. I expect adoption of EV to happen very quickly for suburban commuting, as the dumbing down of drivers continues.

I like where you're going with your build. Keen to see where it takes you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
    • found a company that makes a flat gauge face 3-d printed mounting base kit to eliminate the dished style gauges. if anyone else is looking to do the same https://www.dashfreaks.de/shop/flat-dials-holder-nissan-skyline-r34-gt-gtt/    
    • I installed my link ecu shortly after. But car ran fine with stock ecu and r35 coils, just had the traction control and slip lights on.
×
×
  • Create New...