Jump to content
SAU Community

Recommended Posts

Retrofit pretty much complete:

 

Fixing up broken plastic tabs:

 

IMG_20170626_WA0015.jpg

 

IMG_20170626_WA0012.jpg

 

 

IMG_20170626_WA0007.jpg

 

Blacking out the housing:

 

IMG_20170627_WA0011.jpg

IMG_20170627_WA0014.jpg

 

IMG_20170627_WA0016.jpg

 

IMG_20170627_WA0019.jpg

 

 

I'll get some better output shots this weekend when i pickup the car

 

 

  • Like 4

 Been driving around with the lights and the light output is amazing i must say.

 

DSC02624.jpg

 

 

This is the light output vs new jeep stock xennons. It also is much better than my Evo X Xennons. You can also change the bulbs to Phillips ones which again will be much better:

 

Jeep Xennon:

 

IMG_20170628_WA0019.jpg

 

R34:

 

19553505_1750355104978841_983218819_n.jp

 

 

  • Like 3
  • 2 weeks later...
  • 8 months later...

Just an update decided to fix my airbox restriction issue, last time i was on Trent's dyno it was ~10rwkw restriction on the stock airbox.

Bought a 4 inch wide Pod and adaptor.

Got JDM Garage Melbourne to fit it up and do a custom airbox whilst retaining the snorkel and stock look due to VIC Police defects.

 

 

29955382_1874006199299512_2026440648_o.j

 

29993938_1874006232632842_1926842867_o.j

 

29995944_1874006249299507_1595892933_o.j

 

30074357_1874006192632846_1626010188_o.j

 

 

30069718_1874006205966178_167866352_o.jp

 

 

29955419_1874006212632844_1586125424_o.j

 

 

29955404_1874006202632845_1904504071_o.j

 

 

 

 

  • Like 5

Just thought i also would add this in here:

 

Had the daily Evo X for 2 years.

 

Mods: 

  • BMW M2 long beach blue respray
  • Ce28SL rims
  • TMR SST and engine tune
  • Full exhaust

IMG_9746_LI.jpg

 

25991506_10215045001504802_980319403_o_L

 

 

 

 

 

 

  • Like 4
  • 11 months later...

So one night decided to put the car on the roller dynos for fun.

Found out the car was leaning out due to the new airbox. Was also running out of fuel and couldnt lower the boost as the actuator was a 19 or 20psi one and was running at minimum boost.

So now got duel walbro fuel pumps and a Link G4 ecu. Need to get a new BOV as the current one is leaking.

 

Car still runs on the 5 year old bush bearing Hypergear ATR45 internally wastegaated stock position. E85.

 

Before the airbox it was ~360rwkw on a roller dyno and ~380rwkw on a hub. (racepace and trents dyno)

So about +60rwkw.

 

car.jpg

 

graph.jpg

 

 

 

 

  • Like 1
3 hours ago, ComTruise said:

Just had a look through this thread, amazing stuff! I was wondering is that JDl Kit still available somewhere around here? I would love to get my hands on it.

Not sure sorry i imported from UK and pretty sure they stopped after my one as shipping was too much

19 hours ago, blah_blah said:

Not sure sorry i imported from UK and pretty sure they stopped after my one as shipping was too much

Cheers, man. Yeah I have looked around and there is some places that sell it but the price is pretty high and I would have to get it piece by piece (bonnet here, bumper there etc.)

 

On 4/3/2018 at 9:25 AM, blah_blah said:

Just an update decided to fix my airbox restriction issue, last time i was on Trent's dyno it was ~10rwkw restriction on the stock airbox.

Bought a 4 inch wide Pod and adaptor.

Got JDM Garage Melbourne to fit it up and do a custom airbox whilst retaining the snorkel and stock look due to VIC Police defects.

 

 

29955382_1874006199299512_2026440648_o.j

 

29993938_1874006232632842_1926842867_o.j

 

29995944_1874006249299507_1595892933_o.j

 

30074357_1874006192632846_1626010188_o.j

 

 

30069718_1874006205966178_167866352_o.jp

 

 

29955419_1874006212632844_1586125424_o.j

 

 

29955404_1874006202632845_1904504071_o.j

 

 

 

 

Get some black krinkle HTP on that airbox, it will look less "fabbed".

Well, in my mind anyway.

Hell, my old girl looked stock.....  :)

 

post-75773-0-74233000-1371525285.jpeg

On 3/17/2019 at 1:30 PM, mlr said:

Get some black krinkle HTP on that airbox, it will look less "fabbed".

Well, in my mind anyway.

Hell, my old girl looked stock.....  :)

 

post-75773-0-74233000-1371525285.jpeg

 

 

Yeah that black krinkle looks nice!

 

Whats the specs on that?

On 3/16/2019 at 6:39 PM, ComTruise said:

Cheers, man. Yeah I have looked around and there is some places that sell it but the price is pretty high and I would have to get it piece by piece (bonnet here, bumper there etc.)

 

TBH the JDL kit is crap the only thing i got from that thats still on the car was the rear guards.

Every other piece is bits and bobs from other places

 

50 minutes ago, blah_blah said:

 

 

Yeah that black krinkle looks nice!

 

Whats the specs on that?

TBH the JDL kit is crap the only thing i got from that thats still on the car was the rear guards.

Every other piece is bits and bobs from other places

 

UNIGROUP built  it for me years ago, made a lazy 500hp.

 

It did have its issues, eating OEM manual gearboxes was one of them

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...