Jump to content
SAU Community

Recommended Posts

Ok I am on my 3rd afm in 6 months..

New one arrived in post today plug it in and it idles for a bit then stalls. Give it gas it cuts out.

I tried putting the 2 blown ones in and the car goes into limp with them in.

I doubt this part could of died with 0 run time.

I'm in ramsgate sydney, does anyone have an m35 I can bring this new afm too, so that I can test to see if the part is or isn't faulty?

Tried the fault code thing I can't get it to work. Or my cel is blown.

Link to comment
https://www.sau.com.au/forums/topic/420808-m35-afm-troubles/
Share on other sites

Did you do the ECU reset between trying the AFMs?

I can read your codes / erase them. I can also Log the AFM volts to see if it spikes or does anything abnormal. Only one other car I have seen did this, and it has been running fine for a while now using one AFM after going through 3 or 4 in quick time.

Simple things to check would be the connection, and a visual inspection of the wiring loom, and ECU plug. Make sure your AFM is sealed neat on the back of the airbox, and the filter is placed in so crap isn't getting by it.

I'l try it in mine.....Alex is 1 minute from my house too so you could kill 2 birds with one stone.

Will have to be quick though because both of us are off to PI next wednesday for a week!

IMPREZA WRX and STI 1998-2000

FORESTER GT 1998-2000

also NISSAN

PATROL 3.0 GU, GU2, GU3 Turbo Diesel ZD30DDTI 2000-2004

Pulsar 1.6 2000-2003

Pulsar 1.8 2001-2004

Maxima A33 2001 on

Part Number:

22680-AD21A

22680-AD200

22680-AD201

22680-2W200

22680-4M500

22680-4M501

22680-6N200

22680-6N201

22680-AA290

22680-AA301

22794-AA000

22794-AA010

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...