Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

90kg x 10

110kg x 10

140kg x 7

160kg x 3

Bit of a setback in training after my holiday in Perth and two subsequent colds. Earlier this week I pulled:

90kg x 10

110kg x 10

140kg x 6

160kg x 2

Next session will give 150 for reps a go, followed by 160 or 165 for reps.

So today my gym held a deadlifting competition as part of its open day, which I thought was pretty cool. Apparently they will be doing things like thia on a monthly basis. Good to see compound movements being promoted in a commercial gym environment. Prolly helps the new manager is an ex sprinter, who deadlifts close to 300 himself :)

Strangely similar to the comp we had on here - 1.5 x bodyweight for max reps. There were only 5 or 6 competitors unfortunately, so not much in the way of competition, but a few onlookers (~25) and decent prizes made up for it. Being a commercial gym, I took 1st place (tehe) and all the typical big gym bros were too scared to step up to the plate and even give it a go. Shame!

I pulled 120kg x 15 on first attempt and 12 reps for the second, 5 mins later. Really wanted to faint after the second lot! Grip held me back on the first set; the back and heart/lungs wanted to keep going, but the fingers said no. Gotta work on that. Still, that's 5 more reps than I did of the same weight in our comp on here...so I'm glad to see I've progressed.

Props to the fat 50 year old dude who pushed out 9 reps of 180kg...this kind of thing definitely favours the lean and lightweight.

thinking I either need to get more grip strength or some straps - since I'm plateauing on 100kg! Kept finding the bar wanted to slip out of my fingers, didn't help that my gym has no f**king ventilation or fans going in winter at all, making it extremely humid in there to the point that the condensation drips from the roof.

Chalk + mixed grip = instant +50kg grip capacity.

Other than that, there are grip strengthening exercises you can do...holding the lockout on last rep for example.

gym was going off tonight, dat open day full disco spec yo'

congrats birdmang on the win

was at work so couldn't do deadlift comp unfortunately :( wouldn't of won but at least done it

thinking I either need to get more grip strength or some straps - since I'm plateauing on 100kg! Kept finding the bar wanted to slip out of my fingers, didn't help that my gym has no f**king ventilation or fans going in winter at all, making it extremely humid in there to the point that the condensation drips from the roof.

Your grip is weak. Keep doing deads and it will get stronger eventually. Then something else will lag. Use normal grip instead of mixed to help with developing the grip strength. Also focus on squeezing the hell out of your grip when you lift.

Your grip is weak. Keep doing deads and it will get stronger eventually. Then something else will lag. Use normal grip instead of mixed to help with developing the grip strength. Also focus on squeezing the hell out of your grip when you lift.

I had a feeling that this was part of it too - I've been trying to squeeze the crap out of all the weights when I use them to build it up some more

gym was going off tonight, dat open day full disco spec yo'

congrats birdmang on the win

was at work so couldn't do deadlift comp unfortunately :( wouldn't of won but at least done it

Was good to have good music in there for once haha.

Cheers mate. Shame you couldn't make it down; would have been good to have more lifters there. Said they were gonna run another comp later this month for a different lift. I got a $100 Coles Myer card for my efforts - not bad for just doing my workout!

Looking to post some good deadlift numbers during tomorrow's workout.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...