Jump to content
SAU Community

Recommended Posts

The goal is to train 85-95%. The reps will be low. 2-5 . This range is proven to be the most effective in strength improvement. A variety of methods adopt this in different ways.

The concensus seems to be a pure 1rm is best done very sparingly in a training shedule.

Since you don't know how to do them properly Bozodos, I'd suggest sticking to what you are doing. Once you get taught correct tecnique, then go crazy. assuming your goal is to focus on a 1rm improvement over time.

I am in this boat with you. I am not training this movement heavy till such time as I am given competent instruction. Even then interest in 1rm as any kind of training methodology beyond that. Reserved for some sort of lifting test maybe every 3 months or a comp or beer inspired show off session or all 3 at once.

The program Max has devised for our PL team has a 1RM in Week 10 of the program (PTC Method)

So our crew only hit singles once every 10 weeks, then again 2 weeks later at the meet.

In the past though, when our guys were not as strong, we did test 1RM more frequently, as it took less out of the guys.

To give you some idea, Max had never ever loaded a 270 squat, 170 bench or 260 deadlift in the gym before making those lifts at Nats. Because he had successfully completed PTC Method for 10 weeks, plus last week off completely, he was uber confident of making lifts he's never attempted. Thats good programming.

Because at PTC, no one cares what you hit in the gym

  • Like 1

90kg x 10

120kg x 10

150kg x 5

190kg x 1

Went for something different tonight. I want my volume to catch up with my 1RM training, as the gap is getting too big and I'd like to focus on improve my form on the heavier weights. So I pushed the volume weights up by 10kg. Once I get the volume up to around 170 for a few reps, I'll shoot for 200 and beyond. Was pretty happy though, as 170 used to be my 1RM not that long ago. Couldn't resist a single to finish off.

90kg x 10

130kg x 10

160kg x 4

170kg x 2

180kg x 1

I deadlifted without the aid of chalk or straps for years and then one day an Army mate I chatted with in the gym from time to time gave me a bag. Huge difference!

My current deadlift routine is usually:

6 x 100kg (warm up)

8 x 160

8 x 170

5 x 180

1-2 x 190

8 x 140

Followed up by 3 sets 10 x 60kg DB bent-over rows and 3 x machine lat pull down.

Chalk is ultimate though, should buy some and take to gym,

I deadlifted without the aid of chalk or straps for years and then one day an Army mate I chatted with in the gym from time to time gave me a bag. Huge difference!

My current deadlift routine is usually:

6 x 100kg (warm up)

8 x 160

8 x 170

5 x 180

1-2 x 190

8 x 140

Followed up by 3 sets 10 x 60kg DB bent-over rows and 3 x machine lat pull down.

good job, when you trying for 200?

I'm actually training back tonight, so might even give 200 a go. Probably go straight from my warm up to a few reps at 160 and then try 200.

I've been using the routine I detailed above (with the odd variation) for months so probably time to mix it up a bit. I tend to get comfortable at a certain level with my training and don't push myself into new territory very often.

One of the advantages of military life is the time and access to excellent quality gym's. I've been training for years and tend to just train for health and fitness rather than try to set PBs for bragging rights these days.

I'm actually training back tonight, so might even give 200 a go. Probably go straight from my warm up to a few reps at 160 and then try 200.

I've been using the routine I detailed above (with the odd variation) for months so probably time to mix it up a bit. I tend to get comfortable at a certain level with my training and don't push myself into new territory very often.

One of the advantages of military life is the time and access to excellent quality gym's. I've been training for years and tend to just train for health and fitness rather than try to set PBs for bragging rights these days.

awesome, good luck, sounds like you have the right attitude.

Yeah cheers.

There are some strong lads in the gym on base, some of them get right into lifting bigger numbers. One of the younger guys I trained with a bit last year and earlier this year was routinely deadlifting 270-280 1RM... after pulling multiple sets at lighter weights. He did the same with bench - peaked at 180 last time I saw him. This kid was about 6'4, low 100's and all of 19yrs old!

Well I followed through with my comments earlier today about giving 200kg a shot.

I warmed up with 8 x 100kg, followed by 8 x 160, then did 2 x 200 easy enough that I decided to try 210... and I managed one without resorting to poor form. Dropped back to 170 but after 6 I was pretty much gone.

I continued on and did 3 x 8 60kg DB one arm upright rows and 3 x 8 lat pull down, but unlike normal I'm feeling noticeable more shagged. Might shift squats to Fri.

In general not sure why anyone except guys who compete don't use straps and forearms will always fail before the back does

I've always done deads last on back day as there's no energy left after them

On high rep sets my grip gives way...on low reps and singles, my back gives in first. But that's okay; both play catchup on each other. Why train around the weakness and create a dependence in equipment? I want my forearms to be strong too. You're only as strong as your weakest muscles.

As for deads last on back day, I used to do the same...but now I stick it up front as rows and pulldowns rob you of performance. They are assistance exercises to the deadlift and should be done after, so you don't fatigue support muscles early on.

Well I followed through with my comments earlier today about giving 200kg a shot.

I warmed up with 8 x 100kg, followed by 8 x 160, then did 2 x 200 easy enough that I decided to try 210... and I managed one without resorting to poor form. Dropped back to 170 but after 6 I was pretty much gone.

I continued on and did 3 x 8 60kg DB one arm upright rows and 3 x 8 lat pull down, but unlike normal I'm feeling noticeable more shagged. Might shift squats to Fri.

Nice work there. Is that a pb for you? What do you weigh and how tall are you?

Thanks L33SH.

Thanks Birds. Yes mate it is a PB, I usually rep my way up to 190 (until tonight) not beyond.

I'm 183 / 6' and came in at 88kg on the scales tonight.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...