Jump to content
SAU Community

Recommended Posts

Just keep chipping away doing lots of squat volume around 80-85% 1RM and add weight/sets/reps when you hit targets like 5x5 etc so you're continually increasing the stress, this way you maintain form and don't injure yourself, and you're using heavy enough weight to stimulate growth. You're a novice squatter going by the weights listed so it's just going to take some time to build the strength. If in doubt squat, then squat some more :)

Edited by GHOSTrun
Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/4/#findComment-6825712
Share on other sites

I do "good morning" the weight up when I am struggling in the hole sometimes. Is this a bad thing? Indicative that I should be further back on my heels?

it's very common, especially with 'high bar' squatters... not a terrible thing as long as your not bending excessively... make sure your taking a big breath before each rep and hold it until you finish the rep... this can help brace your core... belts help as well but don't think you need one yet

yep if you let the weight drift forward onto your toes you will find yourself getting bent over

you can also do some good mornings as an assistance exercise

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/4/#findComment-6825741
Share on other sites

hips are generally stronger so they tend to rise first when close to your max and so good morings occur.

Just so you know, I've hurt my back due to this in the past.

Assume your current max is 105 and go back to doing 70 - 85% for reps for a while.

That is my opinion/suggestion

Edited by TTT
Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/4/#findComment-6825829
Share on other sites

60kg x 10

75kg x 10

90kg x 8

100kg x 3

105kg x 1 (died on second rep; thank you safety bars)

I think the leg press is helping a fair bit with squat strength, along with progressively stepping up the weight on squats. I'm tryIng my best not to lose form as I step up the weight...it is still very ATG...however...I do "good morning" the weight up when I am struggling in the hole sometimes. Is this a bad thing? Indicative that I should be further back on my heels?

Damn, Im in a very similar position to you. The numbers are almost identical! Out of curiosity what weight are you doing on the leg press? Its probably irrelevant for squats, but would be good to know. After the squats, I am up to 320kg for 3 reps (300kg for 5). This has increased a lot in the last month but the squat hasn't at all, which is very frustrating!!!!

On the squats, as soon as I go for 110kg, when i try to go low, I start to fall forward!!! Shitting me big time. I have to get some decent advice on how to squat properly. Mind you as per above advice, I'm doing for 5x5's now starting at 60kg and going from there.

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/4/#findComment-6825992
Share on other sites

Leg press weights, or any machine, is irrelevant, as they are designed and made differently

I used a Hack Squat at Golds in Venice Beach with 3 plates aside

The one I was using back home at the time allowed for a 25lb plate per side

Thats a huge difference.....150lbs to 25lbs per side

Can only compare on the same machine

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/4/#findComment-6826890
Share on other sites

I witnessed a bloke in my biomechanics class at uni pump out 25x100kg atg squats like it was nothing today. I train at home so it was crazy to see someone lifting that in front of me, takes it to a whole other level.

I would probably be in a permanent state of dropped jaw if I were to go to Markos' ptc gym!

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/4/#findComment-6826963
Share on other sites

As work has settled down, and i'm getting my car back, I feel it is time to really focus on improving my squats once more.

I may have to post up a video to gain some insight on why I feel like my hips are hinging forwards if I try to squat deep.

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/4/#findComment-6832609
Share on other sites

100kg x 25 is good in any gym, thats great work Mitch

Our guys are into their first week of 5's

Martin got 200kg x 5, Max did 205kg x 5, Dan did 205kg x 5, Zoran did 205kg x 5,Emad 210kg x 5, Spiros 215kg x 5, Jack 240kg x 5, all for 3 sets

Max has 220kg x 5 this Saturday

Link to comment
https://www.sau.com.au/forums/topic/422559-squattin/page/4/#findComment-6834669
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...