Jump to content
SAU Community

Recommended Posts

so attended the skynats at shepparton
tops weekend
two kids = many stops
1_zps28e00e60.jpg
saturday was a show and shine
13_zps50696ade.jpg
i took the opportunity to have the rotors skimmed and bleed the brakes ( only house there working on the car)
i thought i was in for a r33 award as there were only 3 r33s there but alas, not washing the car and having it covered in bird shit= no victory
here is one car that always looks good
13_zps50696ade.jpg
i spent may hours drooling over the jps m3
Sunday was track day at winton
never been there before so was epic fun
jenna and i both did 6 sessions
i got a 1:37 and jenna a 1:49
cant wait to go back as i dont think i did any of the corners correctly ( i would say there is a easy 35 in the car), my fastest lap involved going three car length wide on the grass onto the back straight.... awesome! got to love front and rear lsd's they make it easy
i love a track where you leave after a day and just want to go back to get it rite and that is what winton does ( everyone seems to take a diffrent line to what you would consider normal)
2_zps7e703a08.jpg
3_zpsdc4738cb.jpg
12_zpsca15aa83.jpg
4_zps0f3fd5f0.jpg
modany we went to the skid pan and did 4d hellies all day was tops
5_zpsb10c3e80.jpg
7_zpsa5965ecc.jpg
8_zpsfbe78d56.jpg
drank to much ... at too much.. trashed the car and it didnt snap in half
ill find a vid of the 4wd helis... brutal on the car
tops time will bang again

  • Like 4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...