Jump to content
SAU Community

Recommended Posts

Ah sorry boys sounded a bit dumb what I said there I was running penrite sin and switched to royal purple! Mate it's done alot for me car it's runs way smoother, revs better, comes on boost way faster, just changed the whole way the car is! U will know what I mean when and if u try it it runs MAD! Now

regardless of the OP's lack of explanation..royal purple produce great oils. Using them in my gearbox and diff's - performing great.

Although the one hate i do have with them, is the dark colour of the oil makes it hard to tell if the oil is getting contamintated by something.

Edited by wedge_r34gtr

the question i would put to you is how often do you change you oil if going from one oil to another made that much difference

I change the oil in yhe missus mazda every 10k as per schedule, went from penrite every day synthetic to motul 8100, felt better instantly.

felt crisper, slightly up on power.

I was actually surprised.

Ah sorry boys sounded a bit dumb what I said there I was running penrite sin and switched to royal purple! Mate it's done alot for me car it's runs way smoother, revs better, comes on boost way faster, just changed the whole way the car is! U will know what I mean when and if u try it it runs MAD! Now

Penrite Synthetic what?

All the things you have mentioned point to the fact you probably went to a less viscous oil. I could achieve similar by purchasing no name oil with a lower viscosity.

This guy smells like Sheene the infamous sau ganster rapper, that cuts like chuuudder. He has bumped all his fav threads, and has the same prose. Aka, Onefaster26, and Sheene Ellis, the starter of what turned into the red head thread. Also likes starting similar mind numbing threads.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...