Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wondering if it's possible to replace the front pipe on a RB26 using car ramps? If so are there any tips, tricks, recommended tools to use etc?

I would rather do it myself as I have the time and don't want to pay over $1000 for the local mechanic to fit them as I was quoted.

Any help is greatly appreciated, thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/425044-r33-gtr-turbo-back-exhaust/
Share on other sites

Yes, it's possible to replace front pipes on stands or even just jack the rear end.

Just need extended socket to access the bolt on front pipe and some WD40.

haha, was Dyson Auto, they were good when doing my major service though. Others charged me $3,000+ for a major service, he was less than half that!

One place to name and shame is Ultratune. Went to get a quote and they said they wouldn't touch my Skyline. wtf!

haha, was Dyson Auto, they were good when doing my major service though. Others charged me $3,000+ for a major service, he was less than half that!

One place to name and shame is Ultratune. Went to get a quote and they said they wouldn't touch my Skyline. wtf!

the more they charge means the less they know about your car

haha, was Dyson Auto, they were good when doing my major service though. Others charged me $3,000+ for a major service, he was less than half that!

One place to name and shame is Ultratune. Went to get a quote and they said they wouldn't touch my Skyline. wtf!

most places instantly double their rates when they hear the letters GTR or the word SKYLINE

As mentioned by others, the key to getting that front pipe out is the extension. Its a piss easy job when you have a hoist and proper tools. Anything more than 2hour labour is too much.

To be honest it might be too hard to DIY on the ramp as it can need a fair bit of strength (like breaker bar).

Dan from ERD used to be the go to for me but now that Dan's decided to shutdown the business, I've been bringing my car to Hi-Power Racing at Slacks Creek.

They just fit my engine & gearbox mount for around 350 too. I got a few quotes and prior but there was one, which is a very reputable workshop, told me it is a day's job. BS...

Can you normally judge how well they know the car by the labour hours. I'm sure theres odd cases where freaking bolt is crossed threaded, nut is seized blah blah

blah. But these are out of control.

101 is another place which is my other option but I end up at Hi-Power due to getting along with the owner. Let me know if you need a hand with anything, always there to help a fellow Skyliner.

Hey guys,

Just wondering if it's possible to replace the front pipe on a RB26 using car ramps? If so are there any tips, tricks, recommended tools to use etc?

I would rather do it myself as I have the time and don't want to pay over $1000 for the local mechanic to fit them as I was quoted.

Any help is greatly appreciated, thanks in advance!

haha, was Dyson Auto, they were good when doing my major service though. Others charged me $3,000+ for a major service, he was less than half that!

One place to name and shame is Ultratune. Went to get a quote and they said they wouldn't touch my Skyline. wtf!

most places instantly double their rates when they hear the letters GTR or the word SKYLINE

Or if they think you dont know anything and wanna rip you off. I was pretty disappointed with the quote (from said reputable workshop) I got for the engine mount since they're the one that tuned my car originally.

As mentioned by others, the key to getting that front pipe out is the extension. Its a piss easy job when you have a hoist and proper tools. Anything more than 2hour labour is too much.

To be honest it might be too hard to DIY on the ramp as it can need a fair bit of strength (like breaker bar).

Dan from ERD used to be the go to for me but now that Dan's decided to shutdown the business, I've been bringing my car to Hi-Power Racing at Slacks Creek.

They just fit my engine & gearbox mount for around 350 too. I got a few quotes and prior but there was one, which is a very reputable workshop, told me it is a day's job. BS...

Can you normally judge how well they know the car by the labour hours. I'm sure theres odd cases where freaking bolt is crossed threaded, nut is seized blah blah

blah. But these are out of control.

101 is another place which is my other option but I end up at Hi-Power due to getting along with the owner. Let me know if you need a hand with anything, always there to help a fellow Skyliner.

Cheers for the offer mate, greatly appreciated! If you happen to be in Prossy, come on up haha. But yeah I don't have access to a hoist, so car ramps, my mate, and a shit tonne of booze is the way to go. We have the right equipment so that won't be a prob. Living in a small town sucks to get any sort of help for my Skyline, hence the high prices, I did quote around in Mackay for major service and yeah, over 3k.. Unbelievable! I thought I got lucky with the dude at Dyson Auto, easy to get along with, had a knack for skylines too so I really couldn't complain, especially being local.. I just can't justify taking a day off work, driving down to Mackay or Townsville to get work done. Not at this stage anyway! I must say, first forum I've been on where there are minimal to no douche bags on here. Love it! Thanks again guys :)

Haha no worries mate. I didnt realise you're that far up north. I used to frequent Emerald (due to being in the coal industry) but has been in the office for a while.

SAU is 1 of the few forum you'll find decent tech info and help. I've been on this forum before I own a Skyline and people dont give me shit for asking question. Try searching for any problem you encounter in the forum and theres a high chance someone else before you had it before. Or even posting it and you'll find replies are generally pretty quick and help (sometimes make you think about stuff which you might have missed).

All in all, enjoy your stay here.

Cheers for the offer mate, greatly appreciated! If you happen to be in Prossy, come on up haha. But yeah I don't have access to a hoist, so car ramps, my mate, and a shit tonne of booze is the way to go. We have the right equipment so that won't be a prob. Living in a small town sucks to get any sort of help for my Skyline, hence the high prices, I did quote around in Mackay for major service and yeah, over 3k.. Unbelievable! I thought I got lucky with the dude at Dyson Auto, easy to get along with, had a knack for skylines too so I really couldn't complain, especially being local.. I just can't justify taking a day off work, driving down to Mackay or Townsville to get work done. Not at this stage anyway! I must say, first forum I've been on where there are minimal to no douche bags on here. Love it! Thanks again guys :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...