Jump to content
SAU Community

Recommended Posts

450Hp not kw obviously haha

You really are terrible at this, work with us - read our answers and answer the questions you are asked properly, I have no idea why some of us are still bothering. What fuel will you be running?

Hp not kw obviously haha

Are you bloody stupid mate, or a troll... seriously?

Grow a brain, read what people are asking you to do.

We cannot give you the response you're after if you dont provide details with what you want?

After asking numerous times we finally figure out you want 450hp at the wheels... When do you want boost to come on? Whats your budget for supporting mods? (injectors, manifold, wastegate, ecu etc etc)? What fuel as stated above?

Theres more than just hurr durr i want some power but respone bruzz... everyone has different interpretations of these words, we need to know YOURS in DETAIL.

  • 1 year later...

f**k me is this guy a muppet or what , please forgive my french , risking warning points here , but give up boys , this muppets not helping one bit , try a f**king hair dryer a breville at that , you might get 450 what evers, that's got power response and run it on 240 volt that'll do the trick what ever that may be

okay thinking about it rather than abuse i thought an example might educate, so here goes, hey guys looking for some advice , should i stick with twins or do single turbo change, im running e85 ,looking for 500 hp wanting best response possible , maybe kick in at 4000 rpm, my mods are endless i want to go all the way , throwing money at it like i'm a millionaire, got nitto stroker kit going in , 2.8, got oversized oil pump, apexi hardpipes nismo intercooler, so on so on plazaman plenum, tomei procams 270 deg 11.5 lift over sized valves , 1000 cc injectors ,power fc d jetro ,and giving it to grandma for her daily , any suggestions on turbos please

okay thinking about it rather than abuse i thought an example might educate, so here goes, hey guys looking for some advice , should i stick with twins or do single turbo change, im running e85 ,looking for 500 hp wanting best response possible , maybe kick in at 4000 rpm, my mods are endless i want to go all the way , throwing money at it like i'm a millionaire, got nitto stroker kit going in , 2.8, got oversized oil pump, apexi hardpipes nismo intercooler, so on so on plazaman plenum, tomei procams 270 deg 11.5 lift over sized valves , 1000 cc injectors ,power fc d jetro ,and giving it to grandma for her daily , any suggestions on turbos please

I have an unopened engine using factory cams, and factory plenum. Its using a Brae high mount with a 50mm external gate with one of my ATR43G4SAT turbochargers on E85 fuel. This is probably as close as you can get towards factory T25's response while been able to reach the 400awkws goal. For 500awhp / 373awkws, it was reached at 21psi. Power readings corresponding to other boost levels of my car can be found on the RB26 dyno section:

http://www.sau.com.au/forums/topic/93880-rb26-turbo-upgrade-all-dyno-results/page-26#entry7529745

Blues: ATR43G4SAT

Purple: Factory twin T25s

powervsstock2.JPG

boostvsstock.jpg

Anyone got any experience Pro-boost stuff.

I am considering the GT35 orTo4z T4 bush bearing kit, manifold and wastegate.

The rotary guys don't mind them.

Any fair and truthful info would be great.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...