Jump to content
SAU Community

Recommended Posts

Is that at efi? Shouldn't all dyno'd read the same power figure

Thats at EFI, The first rule of dynos is they can read what ever you want them to, such as the 365 RWKW stock rodeo at the last dyno day.

  • Like 1

Thats at EFI, The first rule of dynos is they can read what ever you want them to, such as the 365 RWKW stock rodeo at the last dyno day.

Rodeo wasn't stock. The letters in the number plate were hks hence the extra power.

Dynos can easily be modified to produce all sorts of readings. Mess with the calibration a little and it will read higher or lower.

Stock on 10psi with bigger intercooler, splitfire coilpacks, 600hp walbro apparently, full 3" varax exhaust and of course a pod filter for them power gains

Apparently he got the stock ecu tuned of that's possible when I bought it

Most of the places here are top workshops. If I were you I'd go to which ever is easiest for you to get to and talk to them to get av feel for them. If you like them and are comfortable with it then go with them. ...

If you aren't in too much of a hurry, use Toshi when he comes back up.

I saw that you had posted here and immediately figured that you would recommend Toshi :P

When is he back up next? Doesn't lack of Dyno make it harder?

Lack of dyno = better tune ;)

But he can use a shop dyno if so required

Huh?

It has to be going through the rev range in gear to tune it properly. Cars like yours, Ants', Bunta's would hit stupid speeds in 3/4th at high rpm. Where do you get that? Your property is long, but not that long! :P

Huh?

 

It has to be going through the rev range in gear to tune it properly. Cars like yours, Ants', Bunta's would hit stupid speeds in 3/4th at high rpm. Where do you get that? Your property is long, but not that long! :P

I died a road tune once. My heart isn't strong enough for another

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...