Jump to content
SAU Community

Recommended Posts

sound deadener delete.

we also remove everything under the dash. though left the firewall heat shielding.

IMG_1973.jpg

IMG_1976.jpg

This stuff at the back was too hard to get too and I didnt have a heat gun. So I left it, will get back to it another day.

IMG_1977.jpg

  • Like 1

next up, more lightening.

IMG_1951.jpg

With the boot skin and hinges and lock gone. Bonnet pins now hold it all in place.

Best way to line up the holes on the bonnet, drill it from the inside...

Rear wiper motor and gear removed here as well and the radio antenna motor.

532520_10151740922527704_216824329_n.jpg

You can see the gurney fitting here and the bonnet pins in the boot. The oe lock hole was used to another bonnet pin on a bracket to hold everything down.

The gurney is just a piece of 10mm angled alloy from bunnings with slots cut in it allowing it to be bent into shape.

d3dfwfasd.png

  • Like 1

This time around NSW are using the full WTAC rule book. so back to street tyres.

But! Yokohama don't have any 285 or 295's available.

So the only other option was Hankooks, z222.

In 285 they actually measure 295 and are huge on 18x10's. And Hankook be smoking as they are a 35 profile as well, very tall!

I'm working in Sydney at this stage (the day before nsw time attack). so my brother and dad are running around getting the car ready back in melbs.

i meet them in goulburn for the event.

IMG_2001.jpg

cool. yep i removed that stuff too. and if you happen to go down that road of lexan, i saved 2.5kg each door, and about 4.5kg's in the rear screen. another 2.5kg's (each) in instrusion bars if you havent removed them, ofcourse if its still a regular streeter maybe leave them there. love the car mate, keep it up.

I've seen this car a few times at various events and I am absolutely astounded/impressed at your Winton time.

I'm not saying the car isn't well sorted, but I am definitely saying that is a crazy fast time for a car with the power this has. Which is a very good indicator of how good your driving is.

Clearly all that track time has payed off and I am going about my car the entirely wrong way!

Great build thread dude. I'll come and say hi the next time I see you at Winton/DECA.

I was thinking the same thing Dan, I'm always thinking the car is holding me back, which it probably is a little but not as much as my driving.

If John can cut those lap times with the set up and power he has then there is definitely room for improvement in my driving skills.

Great work John!

My new plan is to get my car running and then let John drive it and claim the lap time as my own...

Easiest time I'll ever cut from a PB :D

More than happy to. :yes:

I was thinking the same thing Dan, I'm always thinking the car is holding me back, which it probably is a little but not as much as my driving.

If John can cut those lap times with the set up and power he has then there is definitely room for improvement in my driving skills.

Great work John!

There is always room for improvement, whether that is 0.2 seconds or 2 seconds. It's just chipping away and becoming more confident, having fun also helps!

rear seat/shelf sound deadening, fill plastic shopping bags with dry ice, race tape bags of ice into position leave for 10-15mins remove tape/bags and remove deadening with ease.

i haven't been able to get along to any days as yet this year, the progress on your car looks great!

rear seat/shelf sound deadening, fill plastic shopping bags with dry ice, race tape bags of ice into position leave for 10-15mins remove tape/bags and remove deadening with ease.

i haven't been able to get along to any days as yet this year, the progress on your car looks great!

After spending a cold few hours bashing it off the ground, tunnel and boot I was over it...lol

By the time someone told me about that method, the ice was gone.

Heat gun did an ok job, was actually present as it was freezing outside and nice and warm in the car with the heat gun.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...