Jump to content
SAU Community

Recommended Posts

As a warning.


This is what happens when you have a extra heavy duty single plate clutch with a standard flywheel (suspect it to be second hand) and a R32 GTR with big power during launches. Yes, we only warned him last week.



post-2671-0-71729200-1373957121_thumb.jpgpost-2671-0-07224200-1373957146_thumb.jpgpost-2671-0-44082300-1373957227_thumb.jpgpost-2671-0-22976100-1373957245_thumb.jpgpost-2671-0-99562000-1373957263_thumb.jpgpost-2671-0-40418000-1373957278_thumb.jpgpost-2671-0-17263400-1373957306_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/428748-r32-gtr-clutch-flywheel-explosion/
Share on other sites

Benm had similar experience, although worse as his flywheel exploded and did far more damage. I remember seeing pics of this R32 anyone have link to pics?

Yes the clutch exploded only, although the factory cast iron flywheel are dangerous for big hp and big launches, as they may flex or explode. One piece billet Chrome Molly are best if using a single plate or a 7 1/4 inch twin plate, like Tilton. Nismo, Extreme, OS Giken ect also are billet steel. I am pretty sure for 10 second or faster cars ANDRA require a billet flywheel as well as a 6mm scatter plate around the bell housing.

In my race car I have a custom Chrome Molly Nitrided flywheel to suit the 16mm bell housing adapter and a Tilton 7 1/4 Rally clutch, btw clutch and flywheel combined only weighs just over 9kg. I also run a anti heat anti scatter ex Nascar blanket, over the tunnel inside the car.

DSCF1026.jpg

dscf0522.jpg

DSCF9900_000.JPG

  • 3 months later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...