Jump to content
SAU Community

Recommended Posts

Green flag there is 100% fine. It is after the accident/hazard indicating the hazard is over and the track ahead is clear.

I think its actually a yellow flag now that I've looked at a couple of other news articles. Must just be something that happened when it was turned into a GIF. You can see that it is yellow in another photo. Or perhaps it was changed to yellow after the crash

Just need to deploy the safety car in the wet when the recovery vehicle is out. Double waved yellows is not enough.

Yeh, but then they will try to re-order the grid and what should be a 1-2 lap thing will turn into 6-8 laps. Tyres and brakes cool off. Cars stack up. Standing water increases as cars are not driving at speed....and on restart they all pile into each other :)

I cant believe there cant be a white line at each flag point and when recovery vehicles are on track then the speed is reduced at these points just like in the pits. Make it 120km/h whatever.

Drivers pressing under yellows to bridge a few tenths is just as common when the safety car is out. Hell i recall cars dropping it on track when safety car is out.

It was a massive impact. He was going properly fast when he left the track. It definitely brings into question the whole thing of just having to lift off through the flags. maybe they need to introduce some sort of speed limiter in the same way that a pit lane limiter works, and the driver must activate it for the duration of the sector that the flag is in until such time as they join the queue behind the safety car. This is better than just bringing the safety car out as the drivers still fly through sectors with double yellows until they catch up with the safety car. This could also be used for cars that have pitted from behind the safety car.

I think it's going to be a while before we find out if he's actually ok, or just on the same sort of level of "ok" as Schumacher (awake and out of hospital but a vegetable)

whilst i agree with the pitlane idea, i think the problem will then be, how many flagposts are there? cause you then need a radar gun at each point... although i guess they could use unmanned ones couldnt they?

i kinda answered my own question as i typed...

There's amateur video of the impact that shows Jules's car actually lifts the back of the JCB as he continues through under it. Very big hit, and you'd almost be certain it was a fatality if you weren't told otherwise.

I read up on it too. Frankly, I think it would be a great result if he isn't in a permanently vegetative state. Remember at the moment, as far as we know, he isn't breathing by himself, and his brain is smushed. Heart breaking as it is, I think the family isn't past the point where they will have to decide if they flick the switch or not.

At least he has the best medical professionals money can buy, and is fortunate enough for the crash to have happened in a very developed country. Imagine if it had happened in some of the less developed locations?

Forza Jules.

  • Like 1

Yeh, but then they will try to re-order the grid and what should be a 1-2 lap thing will turn into 6-8 laps. Tyres and brakes cool off. Cars stack up. Standing water increases as cars are not driving at speed....and on restart they all pile into each other :)

I cant believe there cant be a white line at each flag point and when recovery vehicles are on track then the speed is reduced at these points just like in the pits. Make it 120km/h whatever.

Drivers pressing under yellows to bridge a few tenths is just as common when the safety car is out. Hell i recall cars dropping it on track when safety car is out.

Maybe. Maybe they could just restrain themselves and stop trying to reorder the grid. With all the fake overtaking and blue flags it isn't the problem it used to be.

Guess the point is the forks shouldn't be out recovering cars when people are pressing on in the wet. The difference being how you treat things in the wet and the dry as if its dry you have atleast some chance of influencing the outcome of where you crash.

the simple fix is to enforce the existing rules. Double waved yellows mean there's a severe hazard ahead and you should slow down and be prepared to take evasive action or even stop! All they need to do is enforce a speed limit for sectors under yellow & double waved yellow. Problem solved. You don't want SC every time a car's in the fence.

the simple fix is to enforce the existing rules. Double waved yellows mean there's a severe hazard ahead and you should slow down and be prepared to take evasive action or even stop! All they need to do is enforce a speed limit for sectors under yellow & double waved yellow. Problem solved. You don't want SC every time a car's in the fence.

Well I would argue if its wet and some one is in the fence and you need to recover it with a forklift you do need a safety car.

Besides what constitutes slow is arguable. You would know you self that knocking 10km/h off your corner speed feels massively slower to the driver than it really is. Given the down force shed by going slower it doesn't necessarily make it safer. Bianchi's accident would have been catastrophic at most speeds.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...