Jump to content
SAU Community

Recommended Posts

You mean an upgraded TCU software? Only the 3.5 has slightly different mapping, but their ecu is in the sump of the gearbox.

I looked into fitting a PCS transmission controller a few years back, but it's a lot of work.

I was talking to someone about the PCS unit for the RE4 gearbox, wasn't sure how much effort involved

Ask Greg, his works unbelievably well. If only I knew for sure it could run the RE5.

  • Like 1

Hmm *edited* nz tuning shops say they won't touch the nm35 vq25det although the "reflash" (not refresh) is available

Neither will any of the aftermarket ecu manufacturers, and the Emanage just isn't cutting it with so many of my customers wanting 300+kw.

Looks like I need to do everything myself, so I am going to grab a Link 'Fury' and set it up on my car with a plug in loom, copying the HKS install, let you guys know how it goes.

Flex fuel would be very nice. :)

  • Like 3

Neither will any of the aftermarket ecu manufacturers, and the Emanage just isn't cutting it with so many of my customers wanting 300+kw.

Looks like I need to do everything myself, so I am going to grab a Link 'Fury' and set it up on my car with a plug in loom, copying the HKS install, let you guys know how it goes.

Flex fuel would be very nice. :)

Thought you said you weren't going to break the news 'til it was all running?

You know I'm already keen if it gets working, and my cars all yours if you need a Impul/"aftermarket" ECU test car.

Neither will any of the aftermarket ecu manufacturers, and the Emanage just isn't cutting it with so many of my customers wanting 300+kw.

Looks like I need to do everything myself, so I am going to grab a Link 'Fury' and set it up on my car with a plug in loom, copying the HKS install, let you guys know how it goes.

Flex fuel would be very nice. :)

For the uninitiated in the M35 ways, what is the problem with a standalone ECU piggybacked to run the injectors and coils? When I was setting up my adaptronic, they originally assumed I had an M35 and nonchalantly gave me the base map, stating they had done them before. I assume there are many more ECU safeguards when it comes to errors.

Does the Fury let you customize the CAN bus?

Nope, nothing will run our can bus, so the stock ecu must stay in place and remain happy (no errors) for everything to work as per factory.

For the uninitiated in the M35 ways, what is the problem with a standalone ECU piggybacked to run the injectors and coils? When I was setting up my adaptronic, they originally assumed I had an M35 and nonchalantly gave me the base map, stating they had done them before. I assume there are many more ECU safeguards when it comes to errors.

The adaptronic never kept the stock ecu happy, and ran batch fire ignition. It could possibly work well with a little fiddling, but no-one has put the effort into making it run without errors. They have only done one car so far, then that setup was transferred into another car when Craigs threw a few rods. It's now running my old cable throttle, running in limp mode.

I only picked the Fury after a lot of research, My mate Rick and I wanted a standalone in our M35's that was able to run the cams and throttle down the track, once standalone gearbox control was sorted. We are also trying to ditch the pos stock AFM due to it's unreliable nature. MAP tune ftw.

  • Like 1

Hmm *edited* nz tuning shops say they won't touch the nm35 vq25det although the "reflash" (not refresh) is available

Unless you have already tried him your best bet is Soichi from ST Hitec he is able to modify some VQ ecus or alternatively he is an F-Con tuner.

Unless you have already tried him your best bet is Soichi from ST Hitec he is able to modify some VQ ecus or alternatively he is an F-Con tuner.

Unfortunately the Fcon gear has been discontinued and as such is a waste of time (although mine has been good to me, tuning is a pain in Aus though).

Basic remapping could be good for some, but I need a decent plugin, standalone, live tuning solution that any tuner can use, anywhere in the world. This is the only way I can see it happening. It's much harder on these VQ25det's than you would expect. Many have tried and failed.

  • 2 weeks later...

I imagine i'll be starting mine next month at the earliest.

I can't see the 350z 6 speed being fitted and ready to go any earlier.

I haven't made the decision on what engine management i'll be using but i'm keen as always to see how Scotty goes.

Hmm I think all iv wanted from an ecu is the ability to gain fuel economy with current mods and when upgrading + be able to tune on the fly.

Iv looked at all the options and been flogged off because "its in the too hard basket" or incorrect information which steers me away from the tuner.

From what I understand is Uprev and Nistune is out of the picture.

Its fine if I end up putting in a different engine and gearbox, but with the way im liking the vq25det I want to keep it the way it is, just increased response in gearchanges and be it a bit quicker.

Anyone wanting to pull apart a factory ecu and see if a daughterboard can be fitted like the other 'normal' ecu's? Or replicate a nismo ecu ? That would be nice :P

Haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...