Jump to content
SAU Community

Recommended Posts

So were there any more pics and/or coverage from this event? Find it hard to believe that Terry was the only person with a camera there.

considering spectators weren't allowed, I dont find it that hard to believe at all.

So were there any more pics and/or coverage from this event? Find it hard to believe that Terry was the only person with a camera there.

Plenty of others with cameras there. There are a few shots that people have uploaded to FB, but the "main" photo duties were left to the Lowdown guys. Because the Lowdown are covering it (and everyone knew this on the night), most people decided to leave the photography to them.

Here are just a couple of mine (just quick snaps off the phone)

1524921_10152220373219923_776123054_n.jp

1531648_10152220373114923_778442274_n.jp

1544434_10152220373169923_1117423983_n.j

1505240_10152220373294923_118436896_n.jp

  • 4 weeks later...
  • 2 months later...

Should still load for you, if not use mine or paulinas accounts

Nah it just goes to a login page, I tried it loved into my wife account but am not good enough with copmuters to get to it ?

Thanks for the offer, I will look at figuring it out later, cause was there so pics are nice but not important :D




  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...