Jump to content
SAU Community

Help, Fitting Taco

shizzmoo

By shizzmoo,
in Fabrication

 Share

Recommended Posts

shizzmoo Rookie

shizzmoo

Posted
Posted

Sorry if this is in the wrong spot,but I am trying to fit a aftermarket taco,and can find a the single wire for the RPM, I can get the guage to light up and stuff but just no single, I have tried the wires front the ECU and on the back of the cluster, any ideas?

Link to comment
https://www.sau.com.au/forums/topic/437789-help-fitting-taco/
Share on other sites
GTRsean Grand Master

GTRsean

Posted
Posted

What brand of taco? old el paso?

Can't help, either hard or soft taco.

If you need to fit a tacho however...

You will need to find the correct wire from the ecu, or wiring diagram, and check with an automotive multimeter as they can measure rpm.

Hopefully the tacho is actually fine.

  • Like 2
  • 3 weeks later...
89CAL Grand Master

89CAL

Posted
Posted

Has any 1 fitted a Tachometer to a 93 r33 gts s1 Nissan Skyline non turbo 2door Coupe, oh and it's silver and which 1 is the signal wire?

The Tacho's were an option on Silver skylines, had to pay an extra 99c for it to be enabled.

I feel like Taco's now

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • PranK
      My BMW 335i

      By PranK · Posted

      There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • Dose Pipe Sutututu
      Unpeeling the Orange

      By Dose Pipe Sutututu · Posted

      yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
×
×
  • Create New...