Jump to content
SAU Community

Recommended Posts

  • 7 months later...

just spoke to dave at insight scott is in the us of a probably prepping for Sema he quoted me $3k+ for the Emtron I'm still not sold on it as he is the only guy capable so far for tuning it and if you know insight there always flat stick!!

Link to comment
https://www.sau.com.au/forums/topic/440531-emtron-ecus/#findComment-7416163
Share on other sites

I think these are the ones my tuner was telling me about a while ago. Says they are an awesome bit of gear, if you can use it to its full cabability. So many inputs and outputs and will do just about anything. But this is going back a while so I don't remember in great deal what was said (or even if he was talking about these, although pretty sure Emtron sounds right) so my input might not be terribly valid

Basically, if you have been getting by with a Power FC, one of these is probably overkill. If you have use for all the functions then they are a good thing

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/440531-emtron-ecus/#findComment-7416192
Share on other sites

I nearly got one of these but they weren't quite ready when I needed an ecu so I ended up with a Syvecs S8

From what I've heard from scott about these they are an awsome piece of gear and I believe they slot in between the M*00 series Motecs and the new M1* series which is about the same level as my S8 ( the backbone of the Alpha R35 kits )

They have patch looms for a few cars already and I believe they have one for R32-34 GTRs, and can pretty quickly make one for any Nissan

And for the price I was quoted for supply fit and tune ( not full retail so I wont say what that was, but that was still less then the S8 ecu alone ) you would want to be fairly serious about the engine management and be looking at a Motorsport/track use

Link to comment
https://www.sau.com.au/forums/topic/440531-emtron-ecus/#findComment-7417817
Share on other sites

  • 1 year later...

I'm interested to know if anyone's gone any further with Emtron ECUs since this thread was last updated . I was speaking to Scott earlier in the week briefly about them and I like the idea of a more modern EMS that can take advantage of factory knock sensors and tune closer to the edge safely . He said that he is happier to do flex tuning with these systems than earlier ones and make full use use of fuel temp and pressure sensing .

I've gone back to 98ULP but I would like the ability to use E70 and be able to gas up anywhere , who wouldn't .

Thoughts , cheers Adrian .

 

Link to comment
https://www.sau.com.au/forums/topic/440531-emtron-ecus/#findComment-7783245
Share on other sites

I know Efi up on the gold coast have installed a fair few. I think piggaz is getting one too?

Does seem more like a track focused ecu though, i did get a quote for one but something like a link g4+ offers a better blend of price/performance for my setup.

 

Link to comment
https://www.sau.com.au/forums/topic/440531-emtron-ecus/#findComment-7783300
Share on other sites

7 minutes ago, sneakey pete said:

I know Efi up on the gold coast have installed a fair few. I think piggaz is getting one too?

Does seem more like a track focused ecu though, i did get a quote for one but something like a link g4+ offers a better blend of price/performance for my setup.

 

Nick (Intune) has had one installed also. Both his and mine are KV8's. A little more expensive than the usual "Link plug in/Haltech whatever/blah blah" but it has more inputs and outputs then you can poke a stick at. All depends on what you plan on running with it.

You can get a patch loom made so you don't have to hack up your factory loom.

Link to comment
https://www.sau.com.au/forums/topic/440531-emtron-ecus/#findComment-7783304
Share on other sites

I can't remember if Scott said they had or have a plug in version in the pipe to suit an R33 . I just think these KV8s sound like they use more OEM type strategies than the usual offerings . Things like volumetric efficiency tables and short/long term trim settings , more like a true self learning system than simply having closed loop oxygen sensing trying to trim conventional load/speed map systems . 

He said these are aimed at motorsport applications and I guess like the current eco raped emissions engines competition engines need tighter control over what's happening running close to knock and temp limits . Race engines often have to have fuel consumption limits because of limited fuel stops/weight etc . I suppose emissions will be the next thing on the race engine hit list .

Anyway that aside I think tuning close to the limits safely gets the most out of whatever engine you have particularly when not driven at WOT and high revs . The things you can still call a car today feel reasonably crisp and have a broad spread of torque starting pretty early . I don't think its all purely the physical engine itself , modern engine management and tuning would have a big say in how these hot lean burn engines perform . By comparison an RB is a true dinosaur but getting a bit more out of them with smart electronics and tuning can't hurt .

A .

    

Link to comment
https://www.sau.com.au/forums/topic/440531-emtron-ecus/#findComment-7783314
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...